Isn't because you are moving the card before theUV project so it slides infront
of the camera?
below is the set up I would expect
set cut_paste_input [stack 0]
version 6.3 v8
Camera2 {
inputs 0
name Camera11
selected true
xpos -1361
ypos 1628
}
push $cut_paste_input
Camera2 {
name Camera10
selected true
xpos -1360
ypos 1518
}
CheckerBoard2 {
inputs 0
name CheckerBoard5
selected true
xpos -1234
ypos 1337
}
RotoPaint {
curves {AnimTree: "" {
Version: 1.2
Flag: 0
RootNode: 1
Node: {
NodeName: "Root" {
Flag: 512
NodeType: 1
Transform: 0 0 S 0 0 S 0 0 S 0 0 S 0 1 S 0 1 S 0 0 S 0 1024 S 0 578
NumOfAttributes: 11
"vis" S 0 1 "opc" S 0 1 "mbo" S 0 1 "mb" S 0 1 "mbs" S 0 0.5 "fo" S 0 1 "fx"
S 0 0 "fy" S 0 0 "ff" S 0 1 "ft" S 0 0 "pt" S 0 0
}
NumOfChildren: 1
Node: {
NodeName: "Bezier1" {
Flag: 576
NodeType: 3
CurveGroup: "" {
Transform: 0 0 S 1 120 0 S 1 120 0 S 1 120 0 S 1 120 1 S 1 120 1 S 1 120 0
S 1 120 1274.83 S 1 120 730.333
Flag: 0
NumOfCubicCurves: 2
CubicCurve: "" {
Type: 0 Flag: 8192 Dim: 2
NumOfPoints: 36
0 S 1 120 0 S 1 120 2 0 0 S 1 120 1524 S 1 120 880 0 0 S 1 120 0 S 1 120
-2 0 0 S 1 120 4 S 1 120 -2 0 0 S 1 120 1434 S 1 120 944 0 0 S 1 120 -4 S 1 120
2 0 0 S 1 120 34 S 1 120 32 0 0 S 1 120 1206 S 1 120 870 0 0 S 1 120 -34 S 1
120 -32 0 0 S 1 120 14 S 1 120 10 0 0 S 1 120 1128 S 1 120 800 0 0 S 1 120 -14
S 1 120 -10 0 0 S 1 120 32 S 1 120 20 0 0 S 1 120 1062 S 1 120 762 0 0 S 1 120
-32 S 1 120 -20 0 0 S 1 120 -8 S 1 120 8 0 0 S 1 120 1016 S 1 120 632 0 0 S 1
120 8 S 1 120 -8 0 0 S 1 120 -8 S 1 120 4 0 0 S 1 120 1042 S 1 120 606 0 0 S 1
120 8 S 1 120 -4 0 0 S 1 120 -14 S 1 120 -8 0 0 S 1 120 1178 S 1 120 582 0 0 S
1 120 14 S 1 120 8 0 0 S 1 120 -14 S 1 120 -4 0 0 S 1 120 1206 S 1 120 596 0 0
S 1 120 14 S 1 120 4 0 0 S 1 120 -212 S 1 120 30 0 0 S 1 120 1352 S 1 120 644 0
0 S 1 120 212 S 1 120 -30 0 0 S 1 120 -4 S 1 120 -28 0 0 S 1 120 1594 S 1 120
676 0 0 S 1 120 4 S 1 120 28 0 0 S 1 120 6 S 1 120 -6 0 0 S 1 120 1556 S 1 120
772 0 0 S 1 120
-6 S 1 120 6 0
}
CubicCurve: "" {
Type: 0 Flag: 8192 Dim: 2
NumOfPoints: 36
0 S 1 120 0 S 1 120 2 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 0 S 1 120 -2 0
0 S 1 120 4 S 1 120 -2 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -4 S 1 120 2 0 0 S 1
120 34 S 1 120 32 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -34 S 1 120 -32 0 0 S 1
120 14 S 1 120 10 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -14 S 1 120 -10 0 0 S 1
120 32 S 1 120 20 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -32 S 1 120 -20 0 0 S 1
120 -8 S 1 120 8 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 8 S 1 120 -8 0 0 S 1 120
-8 S 1 120 4 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 8 S 1 120 -4 0 0 S 1 120 -14 S
1 120 -8 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 14 S 1 120 8 0 0 S 1 120 -14 S 1
120 -4 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 14 S 1 120 4 0 0 S 1 120 -212 S 1
120 30 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 212 S 1 120 -30 0 0 S 1 120 -4 S 1
120 -28 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 4 S 1 120 28 0 0 S 1 120 6 S 1 120
-6 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -6 S 1 120 6 0
}
NumOfAttributes: 44
"vis" S 0 1 "r" S 0 1 "g" S 0 1 "b" S 0 1 "a" S 0 1 "ro" S 0 0 "go" S 0 0
"bo" S 0 0 "ao" S 0 0 "opc" S 0 1 "bm" S 0 0 "inv" S 0 0 "mbo" S 0 0 "mb" S 0 1
"mbs" S 0 0.5 "mbsot" S 0 0 "mbso" S 0 0 "fo" S 0 1 "fx" S 0 0 "fy" S 0 0 "ff"
S 0 1 "ft" S 0 0 "src" S 0 0 "stx" S 0 0 "sty" S 0 0 "str" S 0 0 "sr" S 0 0
"ssx" S 0 1 "ssy" S 0 1 "ss" S 0 0 "spx" S 0 1024 "spy" S 0 578 "stot" S 0 0
"sto" S 0 0 "sv" S 0 0 "sf" S 0 1 "sb" S 0 1 "nv" S 0 1 "view1" S 0 1 "ltn" S 0
120 "ltm" S 0 120 "ltt" S 0 0 "tt" S 0 4 "pt" S 0 0
}
}
NumOfChildren: 0
}
}
}
}
toolbox {selectAll {
{ selectAll ssx 1 ssy 1 sf 1 }
{ createBezier ssx 1 ssy 1 sf 1 sb 1 tt 4 }
{ createBSpline ssx 1 ssy 1 sf 1 sb 1 }
{ createEllipse ssx 1 ssy 1 sf 1 sb 1 }
{ createRectangle ssx 1 ssy 1 sf 1 sb 1 }
{ brush ssx 1 ssy 1 sf 1 sb 1 }
{ eraser src 2 ssx 1 ssy 1 sf 1 sb 1 }
{ clone src 1 ssx 1 ssy 1 sf 1 sb 1 }
{ reveal src 3 ssx 1 ssy 1 sf 1 sb 1 }
{ dodge src 1 ssx 1 ssy 1 sf 1 sb 1 }
{ burn src 1 ssx 1 ssy 1 sf 1 sb 1 }
{ blur src 1 ssx 1 ssy 1 sf 1 sb 1 }
{ sharpen src 1 ssx 1 ssy 1 sf 1 sb 1 }
{ smear src 1 ssx 1 ssy 1 sf 1 sb 1 }
} }
toolbar_brush_hardness 0.200000003
toolbar_lifetime_type all
toolbar_source_transform_scale {1 1}
toolbar_source_transform_center {320 240}
colorOverlay 0
lifetime_type "all frames"
lifetime_start 120
lifetime_end 120
motionblur_shutter_offset_type centred
source_black_outside true
createNewTrack {{-1} "-1\t(none)\t-1" "1000\tNew Track Layer\t1000"}
name RotoPaint15
selected true
xpos -1234
ypos 1429
}
Card2 {
control_points {3 3 3 6
1 {-0.5 -0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666865 0} 0 {0 0 0} 0
{0 0 0}
1 {0 -0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666865 0} 0
{0 0 0} 0 {0.5 0 0}
1 {0.5 -0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666865 0} 0 {0 0 0} 0
{1 0 0}
1 {-0.5 0 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666716 0} 0 {0
-0.1666666716 0} 0 {0 0.5 0}
1 {0 0 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666716 0} 0 {0
-0.1666666716 0} 0 {0.5 0.5 0}
1 {0.5 0 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666716 0} 0 {0
-0.1666666716 0} 0 {1 0.5 0}
1 {-0.5 0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0} 0
{0 1 0}
1 {0 0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0 0} 0 {0
-0.1666666865 0} 0 {0.5 1 0}
1 {0.5 0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0} 0
{1 1 0} }
name Card4
selected true
xpos -1234
ypos 1476
}
UVProject {
inputs 2
render_mode textured
frustum_culling true
name UVProject4
selected true
xpos -1234
ypos 1534
}
TransformGeo {
translate {{curve i x1 0 x20 0.4} {curve i x1 0 x20 0.2} {curve i x1
-4.704999924 x20 -4.50499992}}
name TransformGeo1
selected true
xpos -1234
ypos 1603
}
push 0
ScanlineRender {
inputs 3
output_motion_vectors_type accurate
name ScanlineRender6
selected true
xpos -1234
ypos 1664
}
Howard
>________________________________
> From: thoma <[email protected]>
>To: [email protected]
>Sent: Thursday, 20 September 2012, 19:15
>Subject: [Nuke-users] Re: UVProject not sticking?
>
>
>Hi Deke,
>
>I can't post exactly what I'm working on but I'll provide a general
>illustration of what I'm talking about below. My problem is that I'm using an
>FBX with animated geo and the transforms for that geo aren't accessible
>seperately within nuke. Plus it's the principle that this node doesn't seem
>to work anymore! So before anyone says it - my real world scenario doesn't
>allow for the parented projector camera example below....
>
>
>Code:
>
>
>set cut_paste_input [stack 0]
>version 6.3 v4
>BackdropNode {
> inputs 0
> name BackdropNode3
> tile_color 0x999999ff
> note_font_size 25
> selected true
> xpos -3153
> ypos 2802
> bdwidth 1339
> bdheight 760
>}
>Camera2 {
> inputs 0
> name Camera12
> selected true
> xpos -2278
> ypos 3327
>}
>push $cut_paste_input
>Axis2 {
> translate {{curve i x1 0 x20 0.2} {curve i x1 0} {curve i x1 0 x20 0}}
> name Axis3
> selected true
> xpos -2278
> ypos 3046
>}
>set N2f2977d0 [stack 0]
>push $N2f2977d0
>Camera2 {
> name Camera13
> selected true
> xpos -2311
> ypos 3147
>}
>CheckerBoard2 {
> inputs 0
> name CheckerBoard4
> selected true
> xpos -2152
> ypos 3030
>}
>RotoPaint {
> curves {AnimTree: "" {
> Version: 1.2
> Flag: 0
> RootNode: 1
> Node: {
> NodeName: "Root" {
> Flag: 512
> NodeType: 1
> Transform: 0 0 S 0 0 S 0 0 S 0 0 S 0 1 S 0 1 S 0 0 S 0 1024 S 0 578
> NumOfAttributes: 11
> "vis" S 0 1 "opc" S 0 1 "mbo" S 0 1 "mb" S 0 1 "mbs" S 0 0.5 "fo" S 0 1
>"fx" S 0 0 "fy" S 0 0 "ff" S 0 1 "ft" S 0 0 "pt" S 0 0
> }
> NumOfChildren: 1
> Node: {
> NodeName: "Bezier1" {
> Flag: 576
> NodeType: 3
> CurveGroup: "" {
> Transform: 0 0 S 1 120 0 S 1 120 0 S 1 120 0 S 1 120 1 S 1 120 1 S 1 120
>0 S 1 120 1274.83 S 1 120 730.333
> Flag: 0
> NumOfCubicCurves: 2
> CubicCurve: "" {
> Type: 0 Flag: 8192 Dim: 2
> NumOfPoints: 36
> 0 S 1 120 0 S 1 120 2 0 0 S 1 120 1524 S 1 120 880 0 0 S 1 120 0 S 1 120
>-2 0 0 S 1 120 4 S 1 120 -2 0 0 S 1 120 1434 S 1 120 944 0 0 S 1 120 -4 S 1
>120 2 0 0 S 1 120 34 S 1 120 32 0 0 S 1 120 1206 S 1 120 870 0 0 S 1 120 -34 S
>1 120 -32 0 0 S 1 120 14 S 1 120 10 0 0 S 1 120 1128 S 1 120 800 0 0 S 1 120
>-14 S 1 120 -10 0 0 S 1 120 32 S 1 120 20 0 0 S 1 120 1062 S 1 120 762 0 0 S 1
>120 -32 S 1 120 -20 0 0 S 1 120 -8 S 1 120 8 0 0 S 1 120 1016 S 1 120 632 0 0
>S 1 120 8 S 1 120 -8 0 0 S 1 120 -8 S 1 120 4 0 0 S 1 120 1042 S 1 120 606 0 0
>S 1 120 8 S 1 120 -4 0 0 S 1 120 -14 S 1 120 -8 0 0 S 1 120 1178 S 1 120 582 0
>0 S 1 120 14 S 1 120 8 0 0 S 1 120 -14 S 1 120 -4 0 0 S 1 120 1206 S 1 120 596
>0 0 S 1 120 14 S 1 120 4 0 0 S 1 120 -212 S 1 120 30 0 0 S 1 120 1352 S 1 120
>644 0 0 S 1 120 212 S 1 120 -30 0 0 S 1 120 -4 S 1 120 -28 0 0 S 1 120 1594 S
>1 120 676 0 0 S 1 120 4 S 1 120 28 0 0 S 1 120 6 S 1 120 -6 0 0 S 1 120 1556 S
>1 120 772 0 0 S 1 120 -6
S 1 120 6 0
> }
> CubicCurve: "" {
> Type: 0 Flag: 8192 Dim: 2
> NumOfPoints: 36
> 0 S 1 120 0 S 1 120 2 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 0 S 1 120 -2 0
>0 S 1 120 4 S 1 120 -2 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -4 S 1 120 2 0 0 S
>1 120 34 S 1 120 32 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -34 S 1 120 -32 0 0 S
>1 120 14 S 1 120 10 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -14 S 1 120 -10 0 0 S
>1 120 32 S 1 120 20 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -32 S 1 120 -20 0 0 S
>1 120 -8 S 1 120 8 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 8 S 1 120 -8 0 0 S 1
>120 -8 S 1 120 4 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 8 S 1 120 -4 0 0 S 1 120
>-14 S 1 120 -8 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 14 S 1 120 8 0 0 S 1 120
>-14 S 1 120 -4 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 14 S 1 120 4 0 0 S 1 120
>-212 S 1 120 30 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 212 S 1 120 -30 0 0 S 1
>120 -4 S 1 120 -28 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 4 S 1 120 28 0 0 S 1
>120 6 S 1 120 -6 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -6 S 1 120 6 0
> }
> NumOfAttributes: 44
> "vis" S 0 1 "r" S 0 1 "g" S 0 1 "b" S 0 1 "a" S 0 1 "ro" S 0 0 "go" S 0 0
>"bo" S 0 0 "ao" S 0 0 "opc" S 0 1 "bm" S 0 0 "inv" S 0 0 "mbo" S 0 0 "mb" S 0
>1 "mbs" S 0 0.5 "mbsot" S 0 0 "mbso" S 0 0 "fo" S 0 1 "fx" S 0 0 "fy" S 0 0
>"ff" S 0 1 "ft" S 0 0 "src" S 0 0 "stx" S 0 0 "sty" S 0 0 "str" S 0 0 "sr" S 0
>0 "ssx" S 0 1 "ssy" S 0 1 "ss" S 0 0 "spx" S 0 1024 "spy" S 0 578 "stot" S 0 0
>"sto" S 0 0 "sv" S 0 0 "sf" S 0 1 "sb" S 0 1 "nv" S 0 1 "view1" S 0 1 "ltn" S
>0 120 "ltm" S 0 120 "ltt" S 0 0 "tt" S 0 4 "pt" S 0 0
> }
> }
> NumOfChildren: 0
> }
> }
>}
>}
> toolbox {selectAll {
> { selectAll ssx 1 ssy 1 sf 1 }
> { createBezier ssx 1 ssy 1 sf 1 sb 1 tt 4 }
> { createBSpline ssx 1 ssy 1 sf 1 sb 1 }
> { createEllipse ssx 1 ssy 1 sf 1 sb 1 }
> { createRectangle ssx 1 ssy 1 sf 1 sb 1 }
> { brush ssx 1 ssy 1 sf 1 sb 1 }
> { eraser src 2 ssx 1 ssy 1 sf 1 sb 1 }
> { clone src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { reveal src 3 ssx 1 ssy 1 sf 1 sb 1 }
> { dodge src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { burn src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { blur src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { sharpen src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { smear src 1 ssx 1 ssy 1 sf 1 sb 1 }
>} }
> toolbar_brush_hardness 0.200000003
> toolbar_lifetime_type all
> toolbar_source_transform_scale {1 1}
> toolbar_source_transform_center {320 240}
> colorOverlay 0
> lifetime_type "all frames"
> lifetime_start 120
> lifetime_end 120
> motionblur_shutter_offset_type centred
> source_black_outside true
> createNewTrack {{-1} "-1\t(none)\t-1" "1000\tNew Track Layer\t1000"}
> name RotoPaint16
> selected true
> xpos -2152
> ypos 3119
>}
>Project3D {
> inputs 2
> name Project3D8
> selected true
> xpos -2152
> ypos 3168
>}
>Card2 {
> translate {0 0 -3.694999933}
> control_points {3 3 3 6
>
>1 {-0.5 -0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666865 0} 0 {0 0 0}
>0 {0 0 0}
>1 {0 -0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666865 0} 0
>{0 0 0} 0 {0.5 0 0}
>1 {0.5 -0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666865 0} 0 {0 0 0}
>0 {1 0 0}
>1 {-0.5 0 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666716 0} 0 {0
>-0.1666666716 0} 0 {0 0.5 0}
>1 {0 0 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666716 0} 0 {0
>-0.1666666716 0} 0 {0.5 0.5 0}
>1 {0.5 0 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666716 0} 0 {0
>-0.1666666716 0} 0 {1 0.5 0}
>1 {-0.5 0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0}
>0 {0 1 0}
>1 {0 0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0 0} 0 {0
>-0.1666666865 0} 0 {0.5 1 0}
>1 {0.5 0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0}
>0 {1 1 0} }
> name Card5
> selected true
> xpos -2152
> ypos 3207
>}
>TransformGeo {
> inputs 2
> name TransformGeo5
> selected true
> xpos -2152
> ypos 3268
>}
>push 0
>ScanlineRender {
> inputs 3
> output_motion_vectors_type accurate
> name ScanlineRender7
> selected true
> xpos -2152
> ypos 3348
>}
>Camera2 {
> inputs 0
> name Camera11
> selected true
> xpos -3019
> ypos 3324
>}
>Camera2 {
> inputs 0
> name Camera10
> selected true
> xpos -3018
> ypos 3214
>}
>CheckerBoard2 {
> inputs 0
> name CheckerBoard3
> selected true
> xpos -2892
> ypos 3032
>}
>RotoPaint {
> curves {AnimTree: "" {
> Version: 1.2
> Flag: 0
> RootNode: 1
> Node: {
> NodeName: "Root" {
> Flag: 512
> NodeType: 1
> Transform: 0 0 S 0 0 S 0 0 S 0 0 S 0 1 S 0 1 S 0 0 S 0 1024 S 0 578
> NumOfAttributes: 11
> "vis" S 0 1 "opc" S 0 1 "mbo" S 0 1 "mb" S 0 1 "mbs" S 0 0.5 "fo" S 0 1
>"fx" S 0 0 "fy" S 0 0 "ff" S 0 1 "ft" S 0 0 "pt" S 0 0
> }
> NumOfChildren: 1
> Node: {
> NodeName: "Bezier1" {
> Flag: 576
> NodeType: 3
> CurveGroup: "" {
> Transform: 0 0 S 1 120 0 S 1 120 0 S 1 120 0 S 1 120 1 S 1 120 1 S 1 120
>0 S 1 120 1274.83 S 1 120 730.333
> Flag: 0
> NumOfCubicCurves: 2
> CubicCurve: "" {
> Type: 0 Flag: 8192 Dim: 2
> NumOfPoints: 36
> 0 S 1 120 0 S 1 120 2 0 0 S 1 120 1524 S 1 120 880 0 0 S 1 120 0 S 1 120
>-2 0 0 S 1 120 4 S 1 120 -2 0 0 S 1 120 1434 S 1 120 944 0 0 S 1 120 -4 S 1
>120 2 0 0 S 1 120 34 S 1 120 32 0 0 S 1 120 1206 S 1 120 870 0 0 S 1 120 -34 S
>1 120 -32 0 0 S 1 120 14 S 1 120 10 0 0 S 1 120 1128 S 1 120 800 0 0 S 1 120
>-14 S 1 120 -10 0 0 S 1 120 32 S 1 120 20 0 0 S 1 120 1062 S 1 120 762 0 0 S 1
>120 -32 S 1 120 -20 0 0 S 1 120 -8 S 1 120 8 0 0 S 1 120 1016 S 1 120 632 0 0
>S 1 120 8 S 1 120 -8 0 0 S 1 120 -8 S 1 120 4 0 0 S 1 120 1042 S 1 120 606 0 0
>S 1 120 8 S 1 120 -4 0 0 S 1 120 -14 S 1 120 -8 0 0 S 1 120 1178 S 1 120 582 0
>0 S 1 120 14 S 1 120 8 0 0 S 1 120 -14 S 1 120 -4 0 0 S 1 120 1206 S 1 120 596
>0 0 S 1 120 14 S 1 120 4 0 0 S 1 120 -212 S 1 120 30 0 0 S 1 120 1352 S 1 120
>644 0 0 S 1 120 212 S 1 120 -30 0 0 S 1 120 -4 S 1 120 -28 0 0 S 1 120 1594 S
>1 120 676 0 0 S 1 120 4 S 1 120 28 0 0 S 1 120 6 S 1 120 -6 0 0 S 1 120 1556 S
>1 120 772 0 0 S 1 120 -6
S 1 120 6 0
> }
> CubicCurve: "" {
> Type: 0 Flag: 8192 Dim: 2
> NumOfPoints: 36
> 0 S 1 120 0 S 1 120 2 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 0 S 1 120 -2 0
>0 S 1 120 4 S 1 120 -2 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -4 S 1 120 2 0 0 S
>1 120 34 S 1 120 32 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -34 S 1 120 -32 0 0 S
>1 120 14 S 1 120 10 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -14 S 1 120 -10 0 0 S
>1 120 32 S 1 120 20 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -32 S 1 120 -20 0 0 S
>1 120 -8 S 1 120 8 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 8 S 1 120 -8 0 0 S 1
>120 -8 S 1 120 4 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 8 S 1 120 -4 0 0 S 1 120
>-14 S 1 120 -8 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 14 S 1 120 8 0 0 S 1 120
>-14 S 1 120 -4 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 14 S 1 120 4 0 0 S 1 120
>-212 S 1 120 30 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 212 S 1 120 -30 0 0 S 1
>120 -4 S 1 120 -28 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 4 S 1 120 28 0 0 S 1
>120 6 S 1 120 -6 0 0 S 1 120 0 S 1 120 0 0 0 S 1 120 -6 S 1 120 6 0
> }
> NumOfAttributes: 44
> "vis" S 0 1 "r" S 0 1 "g" S 0 1 "b" S 0 1 "a" S 0 1 "ro" S 0 0 "go" S 0 0
>"bo" S 0 0 "ao" S 0 0 "opc" S 0 1 "bm" S 0 0 "inv" S 0 0 "mbo" S 0 0 "mb" S 0
>1 "mbs" S 0 0.5 "mbsot" S 0 0 "mbso" S 0 0 "fo" S 0 1 "fx" S 0 0 "fy" S 0 0
>"ff" S 0 1 "ft" S 0 0 "src" S 0 0 "stx" S 0 0 "sty" S 0 0 "str" S 0 0 "sr" S 0
>0 "ssx" S 0 1 "ssy" S 0 1 "ss" S 0 0 "spx" S 0 1024 "spy" S 0 578 "stot" S 0 0
>"sto" S 0 0 "sv" S 0 0 "sf" S 0 1 "sb" S 0 1 "nv" S 0 1 "view1" S 0 1 "ltn" S
>0 120 "ltm" S 0 120 "ltt" S 0 0 "tt" S 0 4 "pt" S 0 0
> }
> }
> NumOfChildren: 0
> }
> }
>}
>}
> toolbox {selectAll {
> { selectAll ssx 1 ssy 1 sf 1 }
> { createBezier ssx 1 ssy 1 sf 1 sb 1 tt 4 }
> { createBSpline ssx 1 ssy 1 sf 1 sb 1 }
> { createEllipse ssx 1 ssy 1 sf 1 sb 1 }
> { createRectangle ssx 1 ssy 1 sf 1 sb 1 }
> { brush ssx 1 ssy 1 sf 1 sb 1 }
> { eraser src 2 ssx 1 ssy 1 sf 1 sb 1 }
> { clone src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { reveal src 3 ssx 1 ssy 1 sf 1 sb 1 }
> { dodge src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { burn src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { blur src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { sharpen src 1 ssx 1 ssy 1 sf 1 sb 1 }
> { smear src 1 ssx 1 ssy 1 sf 1 sb 1 }
>} }
> toolbar_brush_hardness 0.200000003
> toolbar_lifetime_type all
> toolbar_source_transform_scale {1 1}
> toolbar_source_transform_center {320 240}
> colorOverlay 0
> lifetime_type "all frames"
> lifetime_start 120
> lifetime_end 120
> motionblur_shutter_offset_type centred
> source_black_outside true
> createNewTrack {{-1} "-1\t(none)\t-1" "1000\tNew Track Layer\t1000"}
> name RotoPaint15
> selected true
> xpos -2892
> ypos 3126
>}
>Card2 {
> translate {{curve i x1 0 x20 0.4} {curve i x1 0 x20 0.2} {curve i x1
>-4.704999924 x20 -4.50499992}}
> control_points {3 3 3 6
>
>1 {-0.5 -0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666865 0} 0 {0 0 0}
>0 {0 0 0}
>1 {0 -0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666865 0} 0
>{0 0 0} 0 {0.5 0 0}
>1 {0.5 -0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666865 0} 0 {0 0 0}
>0 {1 0 0}
>1 {-0.5 0 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0.1666666716 0} 0 {0
>-0.1666666716 0} 0 {0 0.5 0}
>1 {0 0 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0.1666666716 0} 0 {0
>-0.1666666716 0} 0 {0.5 0.5 0}
>1 {0.5 0 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0.1666666716 0} 0 {0
>-0.1666666716 0} 0 {1 0.5 0}
>1 {-0.5 0.5 0} 0 {0.1666666865 0 0} 0 {0 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0}
>0 {0 1 0}
>1 {0 0.5 0} 0 {0.1666666716 0 0} 0 {-0.1666666716 0 0} 0 {0 0 0} 0 {0
>-0.1666666865 0} 0 {0.5 1 0}
>1 {0.5 0.5 0} 0 {0 0 0} 0 {-0.1666666865 0 0} 0 {0 0 0} 0 {0 -0.1666666865 0}
>0 {1 1 0} }
> name Card4
> selected true
> xpos -2892
> ypos 3180
>}
>UVProject {
> inputs 2
> render_mode textured
> frustum_culling true
> name UVProject4
> selected true
> xpos -2892
> ypos 3235
>}
>push 0
>ScanlineRender {
> inputs 3
> output_motion_vectors_type accurate
> name ScanlineRender6
> selected true
> xpos -2892
> ypos 3345
>}
>StickyNote {
> inputs 0
> name StickyNote5
> label "This is the UVproject method that *should result\n in a sticky
>projection with frustrum-derived UVs"
> selected true
> xpos -2980
> ypos 2947
>}
>StickyNote {
> inputs 0
> name StickyNote12
> label "This is the method with parented projector camera. \n It produces the
>result I'm after but with a method I can't always use."
> selected true
> xpos -2338
> ypos 2938
>}
>
>_______________________________________________
>Nuke-users mailing list
>[email protected], http://forums.thefoundry.co.uk/
>http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
>
>_______________________________________________
Nuke-users mailing list
[email protected], http://forums.thefoundry.co.uk/
http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
