I looked at the project file and am confused by which elements you are trying to line up. Can you put labels into your project file to explain it a little more. Thanks!
On 28 September 2012 12:25, jaram <[email protected]> wrote: > ** > I am working on a planetarium / fulldome visualization. I cannot submit a > typical circular domemaster due to time constraints and I must submit 7 > separate SD mpeg2s instead for a G dome setup (Six projectors around, one > at the top) > > My workflow for this is to create my circular domemaster, project it on to > a hemisphere that I have drafted to an architectural drawing of the space, > and use cameras in Nuke to recapture the perspective/overlap offset of the > 7 projectors. I am projecting solid colors from a camera to line up the > cameras with a line drawing showing the projector overlap/configuration > that is being projected onto the dome, but I am having difficulty aligning > the projected solid to the outline of the projection in my image. > > I have attached my project files. Any help is greatly appreciated. > > Thank you > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users >
_______________________________________________ Nuke-users mailing list [email protected], http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
