Hi guys, I tested liebertgxt2/esp2 driver different revisions (rev 2426,2431,2435) the rev 2432 hasn't big change, the driver name changed. And I attached the outputs. I hope these tests help in debug.
Please Spiros check these files, thanks. If you need help, write me. I looked rev 2435 give wrong output the serial and firmware value are wrong. 2010/4/26 Spiros Ioannou <siv...@gmail.com> > I've found the bits containing the multipliers, but It may take time to > find which is which. There are ~15 "multiplier" values hidden in ~70 bits. > It may be impossible to guess which is which with just 2 sets of outputs > (from 2 models). > > What I can do is get a glimpse on a part of those bit values on driver > startup and decide for all multipliers with a "switch/case" , having 2 > cases. That will work for the two models we have data for. If we get another > model, then we can add more cases. That seems reasonable and easily > expandable and will avoid deciphering the bits. > > -S > > > > On Sun, Apr 25, 2010 at 9:00 PM, Arjen de Korte > <nut+de...@de-korte.org<nut%2bde...@de-korte.org> > > wrote: > >> Citeren Robert Jobbagy <jobbagy.rob...@gmail.com>: >> >> >> I think it will be good if the driver check the model of ups (NX or GXT2) >>> and >>> the model is GXT2 then input and output values multipliers will be 0.1 >>> else >>> 0.01. >>> The driver could to use #ifdef preprocess struct. >>> >> >> The latter would require different drivers (since #ifdef statements are >> processed by the preprocessor, so even before the compiler). Packagers that >> wish to bundle precompiled binaries would then have to bundle two different >> drivers. >> >> What is your opinion? >>> >> >> Since the differences between the models are so minor, expect me to veto >> such a change. If there is no way to autodetect this, the driver should >> default to the settings for the most popular model (usually the smallest) >> and allow people to override the default setting in 'ups.conf'. If you can't >> unambiguously determine which multiplier is needed, usually this will cause >> the least amount of problems. >> >> Best regards, Arjen >> -- >> Please keep list traffic on the list >> >> >> >> _______________________________________________ >> Nut-upsdev mailing list >> Nut-upsdev@lists.alioth.debian.org >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev >> > > > _______________________________________________ > Nut-upsdev mailing list > Nut-upsdev@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev > -- Best Regards, Robert
battery.charge: 100 battery.current: 0.00 battery.runtime: 10740 battery.voltage: 54.9 battery.voltage.nominal: 55.2 device.mfr: Liebert device.model: GXT2-1000RT230 device.serial: 0428100126AF041 device.type: ups driver.name: liebertgxt2 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2426 driver.version.internal: 0.02 input.bypass.voltage: 227.6 input.frequency: 49.9 input.frequency.nominal: 49.9 input.voltage: 227.6 output.current: 0.8 output.frequency: 49.9 output.voltage: 230.4 ups.firmware: GXT2MR15D ups.load: 17 ups.mfr: Liebert ups.mfr.date: 12OCT04 ups.model: GXT2-1000RT230 ups.power: 177 ups.power.nominal: 1000 ups.realpower: 81 ups.serial: 0428100126AF041 ups.status: OL ups.temperature: 30.0
battery.charge: 100 battery.current: 0.00 battery.runtime: 9480 battery.voltage: 54.9 battery.voltage.nominal: 55.2 device.mfr: Liebert device.model: GXT2-1000RT230 device.serial: 0428100126AF041 device.type: ups driver.name: liebertgxt2 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2431 driver.version.internal: 0.02 input.bypass.voltage: 231.8 input.frequency: 49.9 input.frequency.nominal: 49.9 input.voltage: 231.8 output.current: 0.7 output.frequency: 49.9 output.voltage: 230.4 ups.firmware: GXT2MR15D ups.load: 16 ups.mfr: Liebert ups.mfr.date: 12OCT04 ups.model: GXT2-1000RT230 ups.power: 166 ups.power.nominal: 1000 ups.realpower: 97 ups.serial: 0428100126AF041 ups.status: OL ups.temperature: 29.5
battery.charge: 100 battery.current: 0.00 battery.runtime: 9480 battery.temperature: 0.0 battery.voltage: 54.9 battery.voltage.nominal: 55.2 device.mfr: Liebert device.model: GXT2-1000RT230 device.serial: GXT device.type: ups driver.name: liebert-esp2 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2435 driver.version.internal: 0.02 input.bypass.voltage: 230.4 input.frequency: 49.9 input.frequency.nominal: 49.9 input.voltage: 230.4 output.current: 0.6 output.frequency: 49.9 output.voltage: 230.4 ups.firmware: ups.load: 16 ups.mfr: Liebert ups.mfr.date: 2MR1 ups.model: GXT2-1000RT230 ups.power: 160 ups.power.nominal: 1000 ups.realpower: 96 ups.serial: GXT ups.status: OL ups.temperature: 29.0
_______________________________________________ Nut-upsdev mailing list Nut-upsdev@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
