Hi Arjen, 2011/5/20 Arjen de Korte <[email protected]>
> Citeren Aurélien Grenotton <[email protected]>: > > > After some investigation, they almost use the krauler-type >> communication already supported in the blazer_usb driver. However, the >> UPS won't reply if the language ID is not 0x4095... >> Therefore, I cloned the krauler_command, adding the language ID and >> unicode to ASCII conversion (taken from libusb). >> > > Thanks for this patch. apart if I've missed something, I've not seen this 'upsilon' patch (well, a reworked version) make its way in the trunk... what about my idea to just use krauler with a param to switch langID? have you something planned for 2.6.1, or will it wait a bit more? > I also enhanced the error!retry mechanism, as the UPS fails to reply quite >> often. >> > > This will put you at risk for (much more severe) timeout problems with the > upsd server, so this part of the patch will not be included. But since this > seems to be a problem for other devices as well, there is some merit in the > problem you're trying to fix. We probably shouldn't complain in the syslog > for intermittent problems and only report once we have reached the MAXTRIES > limit. This needs to be fixed in the 'blazer.c' base driver (which I did). > I've seen that one. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
