Hi,

 I have a UPS device that seems to work fine with the blazer_usb driver.
(I have guessed the driver by googling up the "Product" usb string 010937).
However, it does not appear in the supported list, and I had to manually add a udev rule for granting access to the 'nut' user.

Would be nice if the info I provide below could be used to help the project/future users to have a quicker setup process :-)

  This is the udev rule that seemed to work for me:

#  Eitan VT650 - blazer_usb
ATTR{idVendor}=="ffff", ATTR{idProduct}=="0000",ATTR{product}=="010937", MODE="664", GROUP="nut"

(I added the "product" filter, since the idVendor/idProduct info seem to have generic values).

I'm using the Debian-unstable package: 2.6.1-2

The specs of the product can be found at:
http://www.eitan-tut.co.il/get_file.php?id=2669&force=0

Following is some info from lsusb -v:


Bus 004 Device 005: ID ffff:0000
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0xffff
  idProduct          0x0000
  bcdDevice            9.37
  iManufacturer          19
  iProduct                1 010937
  iSerial                 2
  bNumConfigurations      1
  Configuration Descriptor:    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              160mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID              10.01
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      47
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval             232
Device Status:     0x0002
  (Bus Powered)
  Remote Wakeup Enabled

    bLength                 9
    bDescriptorType         2
    wTotalLength           34



  Cheers, and thank you for working on nut !

       Amit


_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev

Reply via email to