On 8/12/20 3:20 AM, Todd Benivegna wrote:
Hi everyone,
Well, we lost power here again. I was not at home, but I guess a dump
truck smashed into some power poles and took out half the city;
actually tripped most of the breakers in the panel. Anyways, the
power was out for just a few seconds and of course my servers shutdown
on me after power being out for just a second or two. Here is my
syslog from two different machines. I included everything just in case.
“Proton": https://hastebin.com/uluqaqetuc.bash
"Plex”: https://hastebin.com/apudatonun.sql
Let me know what you think. I just tested everything over the weekend
and it all worked perfectly; cut power and machines stayed up until it
was time to shut them down (I temporarily configured them to shut down
after 5 minutes so I didn’t have to wait for the entire battery to
drain). I seriously at am a total loss. I guess HDD Hibernation was
not the culprit either since I’m still getting the same results.
Ugh. Thanks everyone for all your help so far!!!!!
Regards,
Todd
Todd, you fight against some stupid stuff happening in the Synology NAS.
You will get your life back just setting one of the PIs as server and
letting the NAS (and the other 2 computers ) be its slave(s). nut works
perfectly fine on PIs for ages.
As a side note, I still believe that the NAS sends some stupid command
and that you will not see it unless you sniff the conversation.
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@alioth-lists.debian.net
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser