Thanks Jim. Attached are my notes from compiling on the Raspberry PI. I am having some permission issues but I think it is working enough that I see the similar results with the latest master.
On Mon, Feb 22, 2021 at 7:22 AM Matthew Rivett <mriv...@gmail.com> wrote: > Thanks Jim. I will attempt to do the build and see if that works. I'll > respond back with my results. It might take awhile; I don't have much > experience compiling code but I"ll figure it out. > > On Mon, Feb 22, 2021 at 6:36 AM Jim Klimov <jimkli...@gmail.com> wrote: > >> At this time, a newer version than pre-packaged would be a build from >> master branch on github. We are still tying up some loose ends to cut a >> nect official release. >> >> Jim >> >> On Fri, Feb 19, 2021, 05:06 Matthew Rivett via Nut-upsuser < >> nut-upsuser@alioth-lists.debian.net> wrote: >> >>> Hello, >>> >>> I am trying to connect to my Liebert GXT4 UPS using NUT. I have been >>> able to connect by using information from the following post. >>> >>> >>> https://alioth-lists.debian.net/pipermail/nut-upsuser/2017-June/010682.html >>> >>> I am running on a Raspberry PI 3 Model B Rev 1.2 >>> pi@vpn01alp:~ $ cat /etc/os-release >>> PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)" >>> NAME="Raspbian GNU/Linux" >>> VERSION_ID="9" >>> VERSION="9 (stretch)" >>> VERSION_CODENAME=stretch >>> ID=raspbian >>> ID_LIKE=debian >>> HOME_URL="http://www.raspbian.org/" >>> SUPPORT_URL="http://www.raspbian.org/RaspbianForums" >>> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" >>> >>> I installed using >>> apt-get install nut nut-server nut-client >>> >>> My configuration is as follows >>> pi@vpn01alp:~ $ tail /etc/nut/ups.conf >>> # the -h option and/or read the driver's documentation. >>> >>> # Set maxretry to 3 by default, this should mitigate race with slow >>> devices: >>> maxretry = 3 >>> >>> [Liebert] >>> productid=0000 >>> driver = usbhid-ups >>> port = auto >>> desc = "Liebert" >>> >>> I also added the following to /lib/udev/rules.d/62-nut-usbups.rules >>> # Liebert GXT4 - usbhid-ups >>> ATTR{idVendor}=="10af", ATTR{idProduct}=="0004", MODE="664", GROUP="nut" >>> >>> That didn't work so I changed permissions using the following >>> pi@vpn01alp:~ $ lsusb >>> Bus 001 Device 004: ID 10af:0000 Liebert Corp. UPS >>> Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. >>> SMSC9512/9514 Fast Ethernet Adapter >>> Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> pi@vpn01alp:~ $ sudo chmod 0666 /dev/bus/usb/001/004 >>> >>> Now I can see the following information. It doesn't appear to be >>> complete or accurate. >>> pi@vpn01alp:~ $ upsc Liebert >>> Init SSL without certificate database >>> battery.charge: 100 >>> battery.charge.low: 20 >>> battery.charge.warning: 0 >>> battery.type: PbAc >>> battery.voltage: 0.0 >>> battery.voltage.nominal: 0.0 >>> device.mfr: Emerson Network Power >>> device.model: Liebert GXT4 >>> device.serial: 1718700042AFB93 >>> device.type: ups >>> driver.name: usbhid-ups >>> driver.parameter.pollfreq: 30 >>> driver.parameter.pollinterval: 2 >>> driver.parameter.port: auto >>> driver.parameter.productid: 0000 >>> driver.parameter.synchronous: no >>> driver.version: 2.7.4 >>> driver.version.data: Belkin/Liebert HID 0.17 >>> driver.version.internal: 0.41 >>> ups.mfr: Emerson Network Power >>> ups.model: Liebert GXT4 >>> ups.productid: 0000 >>> ups.serial: 1718700042AFB93 >>> ups.status: OL CHRG >>> ups.vendorid: 10af >>> >>> I'm not sure how to find the version of NUT I'm running. I found the >>> changelog (/usr/share/doc/nut) and I'm guessing this is my issue. It >>> appears the latest comment was from 2017. >>> >>> nut (2.7.4-5) unstable; urgency=medium >>> >>> * debian/control: Build-depends against asciidoc-dblatex, Recommends >>> are not >>> pulled automatically by the buildd (Closes: #851015) >>> >>> -- Laurent Bigonville <bi...@debian.org> Wed, 25 Jan 2017 09:14:10 >>> +0100 >>> >>> I am guessing I need to install a newer version. Is this correct? >>> >>> Thanks, >>> Matt >>> _______________________________________________ >>> Nut-upsuser mailing list >>> Nut-upsuser@alioth-lists.debian.net >>> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser >> >>
<<attachment: compile_nut.zip>>
<<attachment: NUT_Liebert_Output.zip>>
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser