On Jan 26, 2022, at 3:01 PM, William Cole via Nut-upsuser <nut-upsuser@alioth-lists.debian.net> wrote: > > Thank you for your reply and help. > > I admit to still learning how to use NUT. > > My general NUT-use plan is as follows: the NUT server Pi controls a number of > network devices; router, VoIP, mesh pod, fiber connection, etc., but no > computers other than the Pi server. It would shut down last. The client Pi > controls two PCs and would shut down first after shutting down its attached > devices. If this is not workable, please let me know.
That is pretty much the textbook NUT master/slave arrangement. Additional information is in section 5 of Roger's configuration guide: http://rogerprice.org/NUT/ConfigExamples.A5.pdf > I have made the change to the client's ups.conf adding the entry for APCES750 > [and keeping it on the server's ups.conf]. You can keep it in the server's ups.conf, but you may want to make a note that it is really for the other system (in case you get log messages from one of the startup scripts that starts drivers). The ups.conf file only needs to list directly-attached (USB, serial, etc) UPSes, not the remote ones. > However, I am now getting this message set when I run sudo service > nut-client status on the client: > > UPS [APCES750@192.168.101] connect failed: Connection failure: Network is > unreachable > Master privileges unavailable on UPS [APCES850@192.168.1.100] > Response: [ERR ACCESS-DENIED] Two separate issues: the first does look like an authentication issue. > UPS [ [APCES750@192.168.101] connect failed: Connection failure:Connection > refused > > UPS [ [APCES750@192.168.101] connect failed: Connection failure:Connection > refused > UPS [ [APCES750@192.168.101] connect failed: Connection failure:Connection > refused > UPS [ [APCES750@192.168.101] connect failed: Connection failure:Connection > refused > > UPS [ [APCES750@192.168.101] connect failed: Connection failure:Connection > refused For this, make sure that upsd.conf has a "LISTEN" directive that isn't just listening to 127.0.0.1 I'd recommend "LISTEN 0.0.0.0" (and use firewall rules if you want to limit access to one network, or even just the client Pi) > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser _______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
