Ah, I thought you missed in my earlier reply the part about a bug with debug printouts in 2.8.0 (fixed on master since), did not comment on that when you replied with quoting... So, for now options are to bump debugging to 3+ or to build your own in one of many ways possible :\
On Wed, Jul 5, 2023, 06:23 Karl Schmidt <k...@lrak.net> wrote: > On 7/4/23 10:01PM, Jim Klimov wrote: > > Normally yes - enable and start the target and the particular services > relevant to your setup. > > > > For the binary you have from packaging (if not rebuilt as suggested > earlier), set debug_min=3 in ups.conf section for > > upscode2, to currently trade driver viability for some storage traffic > with more logs :\ > > > > Sorry about that, > > Jim > > OK - this is strange . If I run it WITH the debug - it works - WITHOUT - > it fails. Put debug back in and it works again.. > > With debug I can run upsc malaysia - and it works.. without it fails. > > I'm thinking the old 1200 baud is too slow for something? > > - The logs are sort of big - should I send to list as attachments or > direct? > > > > > > On Wed, Jul 5, 2023, 02:29 Karl Schmidt <k...@lrak.net <mailto: > k...@lrak.net>> wrote: > > > > Ok - I'm wondering is this is a systemd config bit? > > > > systemctl restart nut-driver@malaysia.service > > Job for nut-driver@malaysia.service failed because the control > process exited with error code. > > See "systemctl status nut-driver@malaysia.service" and "journalctl > -xeu nut-driver@malaysia.service" for details. > > root@malaysia:~# systemctl status nut-driver@malaysia.service > > ● nut-driver@malaysia.service - Network UPS Tools - device driver > for malaysia > > Loaded: loaded (/lib/systemd/system/nut-driver@.service; > enabled; preset: enabled) > > Drop-In: /etc/systemd/system/nut-driver@malaysia.service.d > > └─nut-driver-enumerator-generated-checksum.conf > > Active: activating (auto-restart) (Result: exit-code) since > Tue 2023-07-04 19:03:20 CDT; 9s ago > > Process: 14926 ExecStart=/bin/sh -c > NUTDEV="`/usr/libexec/nut-driver-enumerator.sh --get-device-for-service > > malaysia`" && [ -n "$NUTDEV" ] || { echo "FATAL: Could not find a > NUT device section for service unit malaysia" >&2 ; > > exit 1 ; } ; /sbin/upsdrvctl start "$NUTDEV" (code=exited, > status=0/SUCCESS) > > Process: 14955 ExecStop=/bin/sh -c > NUTDEV="`/usr/libexec/nut-driver-enumerator.sh --get-device-for-service > > malaysia`" && [ -n "$NUTDEV" ] || { echo "FATAL: Could not find a > NUT device section for service unit malaysia" >&2 ; > > exit 1 ; } ; /sbin/upsdrvctl stop "$NUTDEV" (code=exited, > status=1/FAILURE) > > > > > > -------->%------------------------------------------------- > > So I tried > > # /usr/libexec/nut-driver-enumerator.sh --get-device-for-service > malaysia > > malaysia > > > > > > > > > > I'm not clear about all the unit files - > > > > ~# systemctl list-unit-files |grep nut > > nut-driver-enumerator.path enabled enabled > > nut-client.service alias - > > nut-driver-enumerator.service enabled enabled > > nut-driver@.service indirect enabled > > nut-monitor.service enabled enabled > > nut-server.service enabled enabled > > nut-driver.target enabled enabled > > nut.target > > > > My understanding was to start via nut.target? > > > > Checking config directory permissions: > > # ll |grep nut > > drwxr-xr-x 2 root nut 4096 2023-07-04 18:46 nut/ > > > > > > # ll > > total 72 > > -rw-r--r-- 1 root root 1076 2023-06-22 00:37 hosts.conf-off > > -rw-r----- 1 root nut 1921 2023-06-22 00:33 nut.conf > > -rw-r----- 1 root nut 10065 2023-07-04 18:35 ups.conf > > -rw-r----- 1 root nut 10068 2023-07-04 18:21 ups.conf~ > > -rw-r----- 1 root nut 7390 2023-06-22 00:35 upsd.conf > > -rw-r----- 1 root nut 2425 2023-06-22 00:36 upsd.users > > -rw-r----- 1 root nut 20355 2023-07-04 18:46 upsmon.conf > > -rw-r----- 1 root nut 4201 2023-01-25 03:27 upssched.conf > > > > -- > > > > -------------------------------------------------------------------------------- > > Karl Schmidt EMail k...@lrak.net > <mailto:k...@lrak.net> > > 3209 West 9th Street Ph (785) 841-3089 > > Lawrence, KS 66049 > > > > The secret of getting ahead is getting started. The secret of > > getting started is breaking your complex overwhelming tasks into > > small manageable tasks, and then starting on the first one. > > --Mark Twain > > > > -------------------------------------------------------------------------------- > > > > _______________________________________________ > > Nut-upsuser mailing list > > Nut-upsuser@alioth-lists.debian.net <mailto: > Nut-upsuser@alioth-lists.debian.net> > > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser > > < > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser> > > > > -- > > -------------------------------------------------------------------------------- > Karl Schmidt EMail k...@lrak.net > 3209 West 9th Street Ph (785) 841-3089 > Lawrence, KS 66049 > > Beware the fury of a patient man. > --John Dryden > > -------------------------------------------------------------------------------- > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser >
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser