I don't think they have variables attached (maybe some for known verdicts after a test). The tests and other available ops should be among `upscmd -l`.
Jim On Mon, Sep 4, 2023, 11:12 Łukasz Michalski via Nut-upsuser < nut-upsuser@alioth-lists.debian.net> wrote: > Hi, > > I have Eaton 3S 700 connected and configure using nut-2.8.0 under > ArchLinux. OL, OB reporting works OK, but I am not able to enable battery > testing. Variables ups.test.* are not reported by upsc: > > [root@black ~]# upsc eaton@192.168.20.2 |grep ups.* > device.type: ups > driver.name: usbhid-ups > ups.beeper.status: enabled > ups.delay.shutdown: 360 > ups.delay.start: 120 > ups.firmware: 02 > ups.load: 5 > ups.mfr: EATON > ups.model: Eaton 3S 700 > ups.power.nominal: 700 > ups.productid: ffff > ups.realpower: 28 > ups.serial: 000000000 > ups.status: OL > ups.timer.shutdown: -1 > ups.timer.start: -1 > ups.vendorid: 0463 > > > Recently I had to replace battery and when using official Eaton UPS > Companion 2.1 under windows7, I see "battery testing" option and I can > choose battery test period (every day, every week, etc). > > Is there any way I can enable battery testing with nut for this model? > > Thanks, > Łukasz > > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@alioth-lists.debian.net > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser >
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser