make install-usb
make[1]: Entering directory `/tmp/nut-092405/drivers'
/usr/bin/install -c -m 0755 newhidups /usr/local/ups/bin
/usr/bin/install: cannot stat `newhidups': No such file or directory
/usr/bin/install -c -m 0755 bcmxcp_usb /usr/local/ups/bin
/usr/bin/install: cannot stat `bcmxcp_usb': No such file or directory
/usr/bin/install -c -m 0755 hidups /usr/local/ups/bin
/usr/bin/install: cannot stat `hidups': No such file or directory
/usr/bin/install -c -m 0755 energizerups /usr/local/ups/bin
/usr/bin/install: cannot stat `energizerups': No such file or directory
make[1]: *** [install-usb] Error 1
make[1]: Leaving directory `/tmp/nut-092405/drivers'
make[1]: Entering directory `/tmp/nut-092405/man'
/usr/bin/install -c -m 0644 newhidups.8 /usr/local/ups/man/man8
/usr/bin/install -c -m 0644 bcmxcp_usb.8 /usr/local/ups/man/man8
/usr/bin/install -c -m 0644 hidups.8 /usr/local/ups/man/man8
/usr/bin/install -c -m 0644 energizerups.8 /usr/local/ups/man/man8
make[1]: Leaving directory `/tmp/nut-092405/man'
[EMAIL PROTECTED] nut-092405]# /usr/local/ups/bin/bcmxcp_usb -DD -u nut -a powerware
bash: /usr/local/ups/bin/bcmxcp_usb: No such file or directory
On 9/24/05, Kjell Claesson <[EMAIL PROTECTED]> wrote:
Hi John.
Have you run the 'make install-usb' so the driver is located in the bin
directory? Then you have to set up the ups.conf so the driver is
bcmxcp_usb and the port pointing to the device created from the hotplug.
Make shure the device is created.
Check with lsusb ,an it should report the info from
/proc/bus/usb
You may run the driver only to se if it communicate to the ups.
/usr/local/ups/bin/bcmxcp_usb -DD -u nut -a powerware
This command is if the driver is located in /usr/local and it is named
powerware in the ups.conf and it going to be run as user nut.
You have to run this command as root to get it to work. The -DD is the
debug level. But you must find the device first.
In this way you can se that the driver is ok. Then you can start up the
upsdeamon and monitor with the startup script.
The problem is that i don't have any usb ups. So i can not give you any
real assistans on this matter.
Kjell
fre 2005-09-23 klockan 18:06 -0500 skrev John H.:
> apparently not, i still get this...
>
> /etc/rc.d/init.d/ups restart
> Stopping UPS monitor: [FAILED]
> Starting UPS monitor (slave): Network UPS Tools upsmon 2.0.1
> Using power down flag file /etc/killpower
>
>
> Fatal error: insufficient power configured!
>
> Sum of power values........: 0
> Minimum value (MINSUPPLIES): 1
>
> Edit your upsmon.conf and change the values.
> [FAILED]
>
>
> On 9/23/05, John H. <[EMAIL PROTECTED]> wrote:
> I did not have any such files, so I created them, according to
> a website I saw
>
> /etc/hotplug/usb/usbups
>
> #!/bin/bash
> # Implementation by Wolfgang Ocker
> #
> # /etc/hotplug/usb/usbups
> #
> # Sets up newly plugged in USB USP
> #
> # In the usermap file, the first field "usb module" should be
> named
> # "usbups" like this script.
> #
> echo usbups: device = $DEVICE >>/tmp/usb.log
>
> NUTOWNER=nut
>
> if [ "${ACTION}" = "add" ] && [ -f "${DEVICE}" ]
> then
> chmod 0000 "${DEVICE}"
> chown "$NUTOWNER" "${DEVICE}"
> chmod 0644 "${DEVICE}"
> fi
>
>
> and
> cat usbups.usermap
>
>
> # usb module match_flags idVendor idProduct bcdDevice_lo
> bcdDevice_hi bDeviceClass bDeviceSubClass bDeviceProtocol
> bInterfaceClass bInterfaceSubClass bInterfaceProtocol
> driver_info
> # Powerware USB
> libhidups 0x0003 0x06da 0x0002 0 0 0 0 0x00 0x00 0x00 0x00
> 0x00000000
>
>
> should that be ok?
> i did chmod 755 on usbups file
>
>
> On 9/23/05, Kjell Claesson <[EMAIL PROTECTED]> wrote:
> Hi John.
>
> I'm not the man to ask, you should talk to Wolfgang
> Ocker <[EMAIL PROTECTED]>.
>
> But i think you have to alter the usbups.usermap to
> the right vendor and
> product. it looks like this.
> # Powerware USB
> libhidups 0x0003 0x0592 0x0002 0x0000
> 0x0000 0x00
> 0x00 0x00 0x00 0x00
> 0x00 0x00000000
>
> change the 0x0592 to 0x06da and i thin it should
> identify your ups.
>
> After install you should find it in /etc/hotplug/usb i
> think.
> I hope it talks bcmxcp. But talk to wolfgang, i run
> all my ups'es on the serial line.
> I dont have any usb ups.
>
> Regards
> Kjell
>
>
> fre 2005-09-23 klockan 12:48 -0500 skrev John H.:
> > ok, compiled and installed, what am i doing wrong?
> >
> >
> > /etc/rc.d/init.d/ups restart
> > Stopping UPS
> monitor: [FAILED]
> > Starting UPS monitor (slave): Network UPS Tools
> upsmon 2.0.1
> > Using power down flag file /etc/killpower
> >
> >
> > Fatal error: insufficient power configured!
> >
> > Sum of power values........: 0
> > Minimum value (MINSUPPLIES): 1
> >
> > Edit your upsmon.conf and change the values.
> > [FAILED]
> >
> > On 9/23/05, John H. <[EMAIL PROTECTED]> wrote:
> > how do i build just
> > bcmxcp_usb
> > ?
> >
> >
> > On 9/23/05, John H. < [EMAIL PROTECTED]>
> wrote:
> >
> > trying now, would it still
> be /dev/usb/hid/hiddev0?
> >
> >
> > On 9/23/05, Kjell Claesson
> <[EMAIL PROTECTED]>
> > wrote:
> > Hi John.
> >
> > It's not a hid device. Use
> the development cvs
> > and build the bcmxcp_usb
> > driver. The ups may work
> with that. 3105 and
> > 5115 is reported working.
> >
> > Kjell Claesson
> >
> > fre 2005-09-23 klockan 01:05
> -0500 skrev John
> > H.:
> > > Ok, I installed the ups,
> and installed nut,
> > and /proc/bus/usb/devices
> > > says this
> > >
> > > T: Bus=03 Lev=01 Prnt=01
> Port=01 Cnt=01
> > Dev#= 2 Spd=1.5 MxCh= 0
> > > D: Ver= 1.10
> Cls=00(>ifc ) Sub=00 Prot=00
> > MxPS= 8 #Cfgs= 1
> > > P: Vendor=06da
> ProdID=0002 Rev= 0.01
> > > S: Manufacturer=POWERWARE
> > > S: Product=Powerware UPS
> > > C:* #Ifs= 1 Cfg#= 1 Atr=80
> MxPwr= 20mA
> > > I: If#= 0 Alt= 0 #EPs= 1
> Cls=ff(vend.)
> > Sub=00 Prot=00 Driver=(none)
> > > E: Ad=81(I) Atr=03(Int.)
> MxPS= 8 Ivl=20ms
> > >
> > >
> > > why does it say
> driver=none? how do i get it
> > to say hid?
> > >
> > > i am on fc4 machine, and I
> edited ups.conf
> > to say
> > >
> > > [PW3]
> > > driver = hidups
> > > port
> = /dev/usb/hid/hiddev0
> > >
> > >
> > > as I used the make-hiddev
> script from
> > apcupsd, which created that
> > > there.
> > >
> > > thanks!
> >
> >
> >
> >
> > -----BEGIN PGP
> SIGNATURE-----
> > Version: GnuPG v1.4.2
> (GNU/Linux)
> >
> >
> iD8DBQBDNBJ9DrrB/8XoY/ARAogmAKDXk6UHj8Rg
> > +z1pH7BRl8obgl9l3QCfQcAx
> > Z4Ws8bZGGN0uyFSFo1da6AA=
> > =yTtn
> > -----END PGP SIGNATURE-----
> >
> >
> >
> >
> >
> >
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2 (GNU/Linux)
>
>
> iD8DBQBDNFSVDrrB/8XoY/ARAkGDAJ0bkGE2a/jwX/jSmmc1mYcjSsrsfwCg7gyO
> f1r+5Xd/JLlqOCqlCWNiZUM=
> =nBXA
> -----END PGP SIGNATURE-----
>
>
>
>
> _______________________________________________
> Nut-upsuser mailing list
> [email protected]
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
iD8DBQBDNS12DrrB/8XoY/ARAgCqAJ9/Jfm3Ge/mr+Fmpq8leITNsv/LVACfTFT5
B65mEA3GvUsuQ6WdooFNCrA=
=Zpe3
-----END PGP SIGNATURE-----
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
