Le Tue, Feb 07, 2006 at 10:38:23PM +0100, Arnaud Quette a écrit:
>> I'm trying to communicate with a MGE Pulsar STS 16 using nut
> these devices communicate through the UTalk protocol, so
> mge-utalk should be applicable.
[pulsar]
driver = mge-utalk
port = /dev/ttyS1
desc = "Pulsar STS"
never returns...
nw2 nut # upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.0
Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.80.3 (2.0.0)
Startup timer elapsed, continuing...
(same with ttyS0)
Not sure if the cable is ok, though...
Arnaud.
--
Perso: http://launay.org/blog/
Hébergement: http://www.nocworld.com/
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
