On 2006-05-09 17:00 -0400, Charles Lepple wrote: > >Detected a UPS: TRIPP LITE/ TRIPP LITE SMART3000RM2U > > This looks good.
If I try to kill (ctrl+c) the above command I get the following: ^CUSB error: error reading from interrupt endpoint /dev/ugen0.1: Interrupted system call libusb_get_interrupt() returned -4 instead of 8 Unknown battery voltage: 0x3038 Unknown protocol (4)Attached to Tripp Lite TRIPP LITE SMART3000RM2U ^CUSB error: error reading from interrupt endpoint /dev/ugen0.1: Interrupted system call libusb_get_interrupt() returned -4 instead of 8 Unknown value for s[2]: 0x34 dstate_init: sock /var/db/nut/tripplite_usb-auto open on fd 6 Signal 2: exiting Closing device usb_os_close: closing endpoint 5 > > >No matching USB/HID UPS found > >Driver failed to start (exit status=1) > > You may have to check permissions on /dev/ugen0. # sudo usbdevs -d | grep -A 2 -B 1 uhub1 addr 1: UHCI root hub, Intel uhub1 addr 2: TRIPP LITE SMART3000RM2U, TRIPP LITE ugen0 # ls -lah /dev/ugen0 crw-rw---- 1 root operator 0, 78 May 10 08:46 /dev/ugen0 # ls -lah /dev/usb1 crw-rw---- 1 root operator 0, 34 May 10 08:46 /dev/usb1 What would be the proper way to attach the driver to a device in ups.conf under FreeBSD? Thanks, -nrg _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
