I have a very similar UPS with the SNMP module and it works fine. Here
are all the fields I get with upsc:
battery.charge: 100.0
battery.voltage: 040.8
driver.name: snmp-ups
driver.parameter.port: tripplite1
driver.version: 2.0.0
driver.version.internal: 0.40
input.frequency: 059.9
input.voltage: 115.0
ups.firmware.aux: Tripp Lite 3.0.37 (GAPI 2.0)
ups.load: 020.0
ups.mfr: Tripp Lite
ups.model: SMART1500RMXL2Ua
ups.status: OL
Kirk Bocek wrote:
Well, bummer. I was hoping to get this to work. Thanks for your help though.
I guess I'm going to have to spring for an SNMP module for this UPS. Do you
know if
Tripplite has done anything wonky in their implementation that would cause a
problem
with nut's SNMP interface?
--
Greg Gulik http://www.gulik.org/greg/
greg @ gulik.org
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
