Yes, I'd be very interested in getting a copy of your driver which works with the CP1200AVR. Does your cpsups driver support USB connections or only serial? Also, which NUT release is it based on/work with (2.0.x or 2.1)?
Rob > -------- Original Message -------- > Subject: Re: [Nut-upsuser] CyberPower CP1200AVR/BC1200D problems > From: doug reynolds <[EMAIL PROTECTED]> > Date: Thu, July 20, 2006 9:07 pm > To: Rob <[EMAIL PROTECTED]> > Cc: [email protected] > > Rob wrote: > > I recently purchased a CyberPower CP1200AVR UPS and am trying to get > > NUT 2.0.3 or NUT 2.1.0 to work with the newhidups driver, but am > > having little success. Before I purchased I did some googling and saw > > people talking about problems so I'm guessing it may not be supported > > yet? I did find some posts about people getting it to (sort of) work > > with some hacks, but couldn't tell if they ever got submitted to the > > NUT development team. I also found some posts about the CyberPower > > 900AVR/BC900D having issues, and it looks like I am having the same > > problems as the person trying to use that UPS. Namely, I see these > > messages in syslog: > > > > kernel: usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 > > rq 6 len 255 ret -110 > > > > I don't have much experience in protocol decoding, but I am a software > > engineer and I'd like to help get this UPS supported by NUT. Does > > anyone know the status of the support for the CyberPower CP1200AVR or > > have anything new to try? > i got mine working fairly well with the cpsups with a couple change to > the code... email me if you would like a copy of my driver. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
