OK, in any case, once Hans gets the development version of NUT, he can then produce enough debugging output so that we can hopefully support the model. -- Peter
Marc Collin wrote: > > Le vendredi 8 septembre 2006 15:35, Peter Selinger a =E9crit=A0: > > Charles Lepple wrote: > > > On 9/8/06, Hans Fugal <[EMAIL PROTECTED]> wrote: > > > > I have a Tripp Lite OMNI900LCD. > > > > ... > > > > I can't get newhidups to recognize it at all. > > > > > > Support for newer Tripp-Lite USB/HID models is still in the > > > development tree (the trunk in SVN). Instructions for grabbing it via > > > SVN are here: > > > > > > http://www.networkupstools.org/source.html > > > > > > This will hopefully make it into the 2.0.5 release, but I imagine > > > there is a bit of backporting to do. > > > > yes, indeed, I added support for a Tripp Lite ONMI1000LCD to the > > development tree a while ago; I assume this is similar enough to your > > Tripp Lite OMNI900LCD so that it should also work. The driver is > > newhidups. -- Peter > > when i contacted tripp lite, they said me omni900lcd use the same hid table= > =20 > then ripp Lite OMNIVS or ripp Lite SmartUPS don't remember > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
