Hi all - I'm new to both UPS setup and SNMP on linux - so I'd appreciate any help I can get....I'm stuck! I'm running fedora core 5, and have installed net-snmp and nut. I'm trying to get my network connected UPS to this linux machine. My /etc/ups/ups.conf looks like this:
[upsnetwork] driver = snmp-ups port = 172.31.254.7 community = public desc="Network ups" snmp_version = v1 mibs = apcc My /etc/sysconfig/ups looks like this (I'm not even sure what uses this file): # If the UPS is locally attached set it to "yes" SERVER=no # Model of the UPS (filename to call for it, without path) # Example - one of # apcsmart - APC SMartUPS and similar # fentonups - Fenton UPS # optiups # bestups # genericups # ups-trust425+625 # upsdrvctl # You MUST change this, or set SERVER to "no" # To support multiple drivers, set MODEL=upsdrvctl MODEL=NONE # UPS device - needed if UPS is locally attached DEVICE=/dev/ttyS0 # Any options to pass to $MODEL # ex. for my TrippLite UPS, use # OPTIONS="-t 5" OPTIONS= # Any options to pass to upsd UPSD_OPTIONS= # # [End] my APC ups is at address 172.31.254.7 and has SNMP enabled. When I run the upsd command here is what I see: Can't connect to UPS [upsnetwork] (snmp-ups-172.31.254.7): No such file or directory Synchronizing........ giving up So....any ideas what's going on? Thanks _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
