I don't know, this doesn't look so good. Your UPS reports "0" as the value for everything. I don't know what to do about it. -- Peter
Lau Kim Ping wrote: > > > Peter, > > Thank you very much for the patch. After applying your patch, newhidups & > upsd ran successfully. The output of upsc is as follow: > > driver.name: newhidups > driver.parameter.port: auto > driver.version: 2.1.0 > unmapped.ablerexups.batterysystem.batterysystemid: 0 > unmapped.ablerexups.batterysystem.presentstatus.good: 0 > unmapped.ablerexups.batterysystem.presentstatus.used: 0 > unmapped.ablerexups.batterysystem.temperature: 0 > unmapped.ablerexups.batterysystem.test: 0 > unmapped.ablerexups.batterysystem.voltage: 0 > unmapped.ablerexups.flow.configactivepower: 0 > unmapped.ablerexups.flow.configapparentpower: 0 > unmapped.ablerexups.flow.configfrequency: 0 > unmapped.ablerexups.flow.configvoltage: 0 > unmapped.ablerexups.flow.delaybeforeshutdown: 0 > unmapped.ablerexups.flow.delaybeforestartup: 0 > unmapped.ablerexups.flow.flowid: 0 > unmapped.ablerexups.flow.highvoltagetransfer: 0 > unmapped.ablerexups.flow.imanufacturer: 0 > unmapped.ablerexups.flow.iproduct: 0 > unmapped.ablerexups.flow.iserialnumber: 0 > unmapped.ablerexups.flow.lowvoltagetransfer: 0 > unmapped.ablerexups.powerconverter.output.presentstatus.ablerex1: 0 > ups.mfr: UIS Ablerex > ups.model: Ablerex USB Interface 049e > > I then turned off the main switch & then ran upsc again. Even the UPS was on > battery, the output of upsc remained the same. I was hopping at least one of > the values would dropped to a negative value. What should I do next? Thanks. > > **** > > On Sat, 23 Sep 2006 16:06:37 -0300 (ADT) > [EMAIL PROTECTED] (Peter Selinger) wrote: > > >The patch I just sent may not work; please try this one instead. > >-- Peter > > > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser