Hello,
I have encountered problems trying to set up nut to work with APC BackUps Pro
CS connected over USB to an AMD64 machine running Debian. While apcupsd works
fine with that device, whenever I start upsd I get the following messages in
syslog:
hidups[23159]: Startup successful
upsd[23160]: Connected to UPS [apc1]: hidups-hiddev0
upsd[23161]: Startup successful
hidups[23159]: Unhandled event: 0x8500d1 (1)
hidups[23159]: Unhandled event: 0x840068 (0)
hidups[23159]: Unhandled event: 0x850043 (0)
hidups[23159]: Unhandled event: 0x840073 (0)
hidups[23159]: Unhandled event: 0x85004b (0)
hidups[23159]: Unhandled event: 0x840065 (0)
hidups[23159]: Unhandled event: 0x8500db (0)
hidups[23159]: Ignoring x86 page event 0xff860080 (0)
hidups[23159]: Unhandled event: 0x840058 (6)
hidups[23159]: Unhandled event: 0x8500d1 (1)
hidups[23159]: Unhandled event: 0x840068 (0)
hidups[23159]: Unhandled event: 0x850043 (0)
hidups[23159]: Unhandled event: 0x840073 (0)
hidups[23159]: Unhandled event: 0x85004b (0)
hidups[23159]: Unhandled event: 0x840065 (0)
hidups[23159]: Unhandled event: 0x8500db (0)
hidups[23159]: Ignoring x86 page event 0xff860080 (0)
[five seconds pass...]
hidups[23159]: Unhandled event: 0x8500d1 (1)
hidups[23159]: Unhandled event: 0x840068 (0)
hidups[23159]: Unhandled event: 0x850043 (0)
hidups[23159]: Unhandled event: 0x840073 (0)
hidups[23159]: Unhandled event: 0x85004b (0)
hidups[23159]: Unhandled event: 0x840065 (0)
hidups[23159]: Unhandled event: 0x8500db (0)
hidups[23159]: Ignoring x86 page event 0xff860080 (0)
hidups[23159]: Unhandled event: 0x840058 (6)
hidups[23159]: Unhandled event: 0x8500d1 (1)
hidups[23159]: Unhandled event: 0x840068 (0)
hidups[23159]: Unhandled event: 0x850043 (0)
hidups[23159]: Unhandled event: 0x840073 (0)
hidups[23159]: Unhandled event: 0x85004b (0)
hidups[23159]: Unhandled event: 0x840065 (0)
hidups[23159]: Unhandled event: 0x8500db (0)
hidups[23159]: Ignoring x86 page event 0xff860080 (0)
[and so on]
I've observed this behaviour with several versions of nut, from the one used by
sarge, i.e. 2.0.1, up to and including the version available at present in the
testing branch, i.e. 2.0.4.
Any ideas? If you need more information, please let me know.
Regards,
--
MS
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
