Using the "hidups" driver produces better results, however, I'm not sure if these "unhandled events" errors are good or bad.. I would suspect bad...
Any direction would be appreciated.. Thanks, Richard. [EMAIL PROTECTED]:/usr/src/nut-2.0.5-pre2# ./drivers/hidups -u root -DDDD -a apc /dev/usb/hiddev0 Network UPS Tools: HID UPS driver 0.13 (2.0.5-pre2) Warning: This is an experimental driver. Some features may not function correctly. debug level is '4' Detected APC Back-UPS ES 650 FW:818.w1.D USB FW:w1 on port /dev/usb/hiddev0 addhidvalue(850066, battery.charge): obtained 100 addhidvalue(850068, battery.runtime): obtained 1132 addhidvalue(840035, ups.load): obtained 30 Ignoring x86 page event 0xff860060 (8) Ignoring x86 page event 0xff860060 (8) event(850066, 100) event(850068, 1132) event(850044, 0) event(850045, 0) event(8500d0, 1) event(8500d1, 1) Unhandled event: 0x8500d1 (1) event(850042, 0) event(840069, 0) event(850043, 0) Unhandled event: 0x850043 (0) event(85004b, 0) Unhandled event: 0x85004b (0) event(840065, 0) Unhandled event: 0x840065 (0) dstate_init: sock /var/state/ups/apc open on fd 5 Ignoring x86 page event 0xff860060 (8) event(850066, 100) event(850068, 1132) event(850044, 0) event(850045, 0) event(8500d0, 1) event(8500d1, 1) Unhandled event: 0x8500d1 (1) event(850042, 0) event(840069, 0) event(850043, 0) Unhandled event: 0x850043 (0) event(85004b, 0) Unhandled event: 0x85004b (0) event(840065, 0) Unhandled event: 0x840065 (0) Ignoring x86 page event 0xff860060 (8) event(850066, 100) event(850068, 1132) event(850044, 0) event(850045, 0) event(8500d0, 1) event(8500d1, 1) Unhandled event: 0x8500d1 (1) event(850042, 0) event(840069, 0) event(850043, 0) Unhandled event: 0x850043 (0) event(85004b, 0) Unhandled event: 0x85004b (0) event(840065, 0) Unhandled event: 0x840065 (0) Ignoring x86 page event 0xff860060 (8) event(850066, 100) event(850068, 1132) event(850044, 0) event(850045, 0) event(8500d0, 1) event(8500d1, 1) Unhandled event: 0x8500d1 (1) event(850042, 0) event(840069, 0) event(850043, 0) Unhandled event: 0x850043 (0) event(85004b, 0) Unhandled event: 0x85004b (0) event(840065, 0) Unhandled event: 0x840065 (0) Signal 2: exiting [EMAIL PROTECTED]:/usr/src/nut-2.0.5-pre2# _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser