I'm trying to set up nut with a MGE UPS equiupped with a network
management card, but encountered a problem.
UPS: MGE Pulsar M 3000
Network Management card (installed in the UPS): 66102 (2006 edition)
Operating system: FreeBSD
Nut port version: 2.0.5
Nut driver: snmp-ups
According to MGE in Norway this card is supported by nut, but only
the old version of the card (66244) is listed on the nut hardware
compat page. When I start up the nut daemon, I get the following output:
# /usr/local/etc/rc.d/nut start
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools - Multi-MIBS SNMP UPS driver 0.41 (2.0.5)
Warning: This is an experimental driver.
Some features may not function correctly.
[ups1] nut_snmp_get: .1.3.6.1.2.1.33.1.1.2.0: Error in packet:
(noSuchName) There is no such variable name in this MIB.
ietf MIB wasn't found on ups1
Driver failed to start (exit status=1)
Do any of you know if it is possible to use the 66102 card with the
snmp driver at all, or do I have to buy the old card to get it working?
Any help is appreciated. :)
--
Lars Preben Sørsdahl; +47 957 72 902; fax +47 22 33 60 24
Kongens gate 14; Boks 805 Sentrum, 0104 Oslo;
http://www.conduct.no; mailto:[EMAIL PROTECTED]
Conduct AS - Professional J2EE Open Source
JBoss Authorized Service Partner
Technology, Training and Production Support
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser