Hi Kjell,
Thank you for the information, I will try it when I get a moment over
the next day or so.
Cheers Douglas.
Kjell Claesson wrote:
ons 2007-04-04 klockan 16:23 +1200 skrev Douglas Pearless:
Hi,
Hi Douglas,
I have a Comapq T2400H model 242688-003 and do not have the special
cable to connect it to my serial port.
I have tried all sorts of cable wirings that I found on the net,
including ones for the powerware 5119 which appears to be the same
model.
OK, I think you have seen this :-)
-----------------------------------------------------
Part# 295245-003 (PowerRite Pro)
Software: FailSafe-III
UPS DB-9M DB-9F RS-232
Receive 1 <---------------------------< 3 TxD
Transmit 2 <---------------------------< 2 RxD
Common 4 <---------------------------< 5 SG
PnP_En 6 <---------------------------< 7 RTS
+----< 4 DTR
+----< 6 DSR
------------------------------------------------------
And this should be the cable. And it is for smart mode, so you
can not use it with the generic driver.
I have read the documentation that comes with NUT, tried to read the
source code and looked at the genericups code too. I have hit a bit
of a wall, does anyone have the pinout for a working cable for this
unit that works in the dumb or smart mode, and the ups.conf they
used??
This type of ups is talking upscodeII, so you need to test the upscode2
driver. If it acts like a T1500h you may need to add 'use_pre lf' into
the 'ups.conf'.
ups.conf should look something like this.
[compaq]
driver = upscode2
port = /dev/ttyS0
desc = "Compaq T2400h"
manufacturer = "Compaq"
input_timeout = 5
use_pre_lf = yes
Regards
Kjell
P.S. Send you a pdf of list.
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 268.18.24/742 - Release Date: 1/04/2007 8:49
p.m.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
