Hi ons 2007-04-18 klockan 15:51 +0800 skrev Gregory Orange: > Arnaud Quette wrote: > > 2007/4/17, Kjell Claesson <[EMAIL PROTECTED]>: > >> > It all seems to work but the initial errors or warnings concern me. I'm > >> > running stable 2.05 built from source. > >> > >> This come from the baudhunting function in the driver. > >> If you set the baud_rate in the ups.conf to 9600 You don't get this > >> errors. > >> ... > > > > can't this be filtered to avoid user confusion? >
Yes. I take this up of list with Arjen. The error is due to the fact that is use the 'normal' communication function during baudhunting. And it test to communicate 3 times before it say that it lost the communication. And because it try on the wrong speed it fails all attempt and cast an error. > (Oops, sending to list this time) > > Or for another suggestion, the message could be changed to something like: > No baud rate specified in UPS configuration file ups.conf, attempting > baud rate auto detection... > Attempting communication at 2400 baud... failed > Attempting communication at 4800 baud... failed > Attempting communication at 9600 baud... success > > That would make it look less like debug info and more like useful output > for a user like me who is somewhere in between naive and proficient. This could be done. Regards Kjell _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser