On 6/7/07, FORMER 03 | Baltasar Cevc <[EMAIL PROTECTED]> wrote: > we have three MGE UPS'. I've read all the documents I've found, but > I haven't got the information I need. > All three of them being attached to the same machine I need a way to > identify which is wich (all three use the same driver). They power > different systems (two of them running windows so that I can't easily > setup a network-enabled software on two of them, as I've only seen > a NUT client for MS Windows).
I'm a bit confused by your description, so here is how I understand your setup: all three UPSes are attached to the same machine, so I am assuming that you have all three USB cables coming to one machine running nut. Then there are three distinct machines, each plugged into one UPS, right? If so, then just configure nut for all three UPSes, and then each UPS from the wall at a time. The notifications than nut receives will let you identify each UPS. ~David _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser