I've tried both ttyS1 and ttyS0 as well as connecting UPS to each of the two com ports. Neither worked out.
On 6/11/07, Carlos Rodrigues <[EMAIL PROTECTED]> wrote: > On 6/10/07, Alex Girchenko <[EMAIL PROTECTED]> wrote: > > Disclaimer: I've setup APC UPS monitoring and it works... > > ... but when it comes to mustek powermust 600usb (connected via > > com-port), I can't make it work. > > Got NUT installed via aptitude in ubuntu feisty and a basic setup, > > exactly the same as for the apc, except for the name of the ups and > > the corresponding section of ups.conf > > -- > > [mustek] > > driver = megatec > > port = /dev/ttyS1 > > desc = "Mustek PowerMust 600USB" > > -- > > # upsc [EMAIL PROTECTED] > > Error: Driver not connected > > > > Tried changing the port value to ttyS1, but this won't work either. > > Any suggestions? > > Are you sure your UPS is connected to ttyS1 and not ttyS0? > > -- > Carlos Rodrigues > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser