Hello all. I have now connected the UPS via a serial-cable to a PC running Debian Etch and Nut 2.0.4.
When running "upsdrvctl -u root start" I get: Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS re-established Connect to UPS on /dev/ttyS0 baudrate 9600 Model = PW9120 3000VA Firmware = 02.60 Shutdown delay = 120 seconds Is this the OK? Can I ignore the first errors? In 2006 Kjell wrote at http://osdir.com/ml/monitoring.nut.user/2006-04/msg00055.html : "The thing is that if you have run it on the serial before you go to use the bcmxcp_usb driver it should be set to 'request_only_mode'." How do I set my UPS to "request_only_mode"? Thanks, Tobias _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
