On 26/11/2007, at 12.06, Arjen de Korte wrote: > Jon Bendtsen wrote: > >> I gave up on using the USB converter and used a regular serial >> cable, it works fine using both the powerpanel and the cpsups >> driver. I prefer the powerpanel because the name is slightly nicer >> in the cgi. > > Could you post the output of 'upsc <upsname>' here? We're working on > extending the support for the powerpanel driver, but in order to do > that, we need some information on what is reported by devices that are > supported already. Thanks in advance.
powerpanel driver: --------------------------------------------- [EMAIL PROTECTED]:~# upsc bp500 battery.capacity: 7 battery.charge: 100.0 battery.charge.low: 20 battery.packs: 1 battery.voltage.nominal: 12 driver.name: powerpanel driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.2.0- driver.version.internal: 0.22 input.frequency: 49.9 input.frequency.high: 63 input.frequency.low: 47 input.transfer.high: 272 input.transfer.low: 180 input.voltage: 234 input.voltage.nominal: 230 output.voltage: 234 ups.firmware: 1.704 ups.load: 80 ups.mfr: CYBER POWER ups.model: 500VA ups.power.nominal: 500 ups.realpower.nominal: 330 ups.serial: 000000000000 ups.status: OL ups.temperature: 32 cpsups driver: -------------------------------------------- [EMAIL PROTECTED]:/etc/nut# upsc bp500 battery.charge: 100.0 battery.runtime: 3:58 driver.name: cpsups driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.2.0- driver.version.internal: .05 input.frequency: 50 input.voltage: 234 output.voltage: 234 ups.load: 82 ups.mfr: CyberPower ups.model: OP500TE 1.704 ups.power.nominal: 500 ups.runtime: 16.5 ups.status: OL ups.temperature: 32 _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
