Hi, I've been using nut for a while on a UPS with the generic driver. It has worked well. Thankyou.
I've just installed a new UPS 'INVERTER Atlantic Star T3' and their documentation speaks of megatec. So I tried it. And I get lots of wonderful information I'm not used to seeing. # upsc [EMAIL PROTECTED] battery.charge: 100.0 battery.voltage: 2.31 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.port: /dev/ttyS0 driver.version: 2.0.4 driver.version.internal: 1.4 input.frequency: 49.9 input.voltage: 229.0 input.voltage.fault: 229.0 input.voltage.maximum: 230.4 input.voltage.minimum: 224.9 output.voltage: 220.8 output.voltage.nominal: 220.0 ups.delay.shutdown: 2 ups.delay.start: 3 ups.load: 40.0 ups.mfr: ups.model: 2.1 ups.serial: unknown ups.status: OL ups.temperature: 38.0 Could I please ask some questions about this? What is battery.voltage and battery.voltage.nominal ? How about input.voltage.fault: and input.voltage.maximum ? Are the ups.delay.shutdown: ups.delay.start: for custom commands? Thankyou. Any other observations would be appreciated too. Chris. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
