Citeren "Dario \"subbia\" Cavallaro" <sub...@gmail.com>:
> Ok, strange result...... the ups is still attached, the id is the same, > but it is ignored by the driver. My mistake. I failed to notice the different productid of this device. You should be able to connect to it by adding a couple of variables to the ups.conf entry: [yunto] driver = megatec_usb port = auto desc = "yunto q700" subdriver = agiler-old vendorid = 06da productid = 0002 Sorry about the confusion. We won't be able to support this out of the box for now, since we already have another driver that is using the same VID:PID combination. Adding an another (incompatible) driver will break existing installations that rely on a HAL addon that might be in use. It could be done, by trying out both at the time of connecting, but this will require merging the megatec_usb and bcmxcp_usb drivers somehow. At runtime, this could then select the appropriate protocol handler. Best regards, Arjen -- Please keep list traffic on the list _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser