> 2009/8/28 Thomas Zulliger <thomas.zulli...@quiksilver.com.au> > Hi Arnaud and Thomas.
Can not reproduce it. upsdrvctl -DD start Network UPS Tools - UPS driver controller 2.4.1 Starting UPS: pw3105 exec: /lib/nut/bcmxcp_usb -a pw3105 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 No errors. The only thing that come to my mind is that the driver is already running. Check by: ps xau |grep bcmxcp If you try to start it and it is running you get: Starting UPS: pw3105 exec: /lib/nut/bcmxcp_usb -a pw3105 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Regards Kjell > > I'm experiencing exactly the same problem > > > > DNS-323 fun_plug Fonz > > nut 2.4.1-1.tgz > > powerware 3105 > > using BCMXCP_usb > > > > /mnt/HD_a2/packages # lsusb > > Bus 002 Device 001: ID 0000:0000 > > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > > Bus 001 Device 001: ID 0000:0000 > > > > /mnt/HD_a2/packages # upsdrvctl -DD start > > Network UPS Tools - UPS driver controller 2.4.1 > > Starting UPS: pw3105 > > exec: /ffp/bin/bcmxcp_usb -a pw3105 > > Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) > > USB communication subdriver 0.17 > > Can't claim POWERWARE USB interface > > Unable to find POWERWARE UPS device on USB bus > > Things to try: > > - Connect UPS device to USB bus > > - Run this driver as another user (upsdrvctl -u or 'user=...' in > > ups.conf). > > See upsdrvctl(8) and ups.conf(5). > > Fatal error: unusable configuration > > Driver failed to start (exit status=1) > > /mnt/HD_a2/packages # upsdrvctl -DD -u root start > > Network UPS Tools - UPS driver controller 2.4.1 > > Starting UPS: pw3105 > > exec: /ffp/bin/bcmxcp_usb -a pw3105 -u root > > Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) > > USB communication subdriver 0.17 > > Can't claim POWERWARE USB interface > > Unable to find POWERWARE UPS device on USB bus > > Things to try: > > - Connect UPS device to USB bus > > - Run this driver as another user (upsdrvctl -u or 'user=...' in > > ups.conf). > > See upsdrvctl(8) and ups.conf(5). > > Fatal error: unusable configuration > > Driver failed to start (exit status=1) > > /mnt/HD_a2/packages # > > > > I rebooted, unplugged, reinstalled etc etc..issue still persists! Can you > > please point me in the right direction? > > > > [pw3105] > > driver = bcmxcp_usb > > port = auto > > desc = "PowerWare UPS" > > I'm still puzzled by this issue: I can't reproduce it with the units I have > here :( > > would you be able to test a patch or the development branch (subversion > trunk)? > > cheers, > Arnaud _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser