Hi Installed new APC Back-UPS CS 350 on single server running openSUSE 11.2 64-bit and configured NUT 2.4.1 (SUSE package) according to instructions.
When testing, NUT shuts down the server correctly and instructs the UPS to power down. UPS does so after some 20s delay, everything without errors. But after restoring main power, even after waiting for 1/2h UPS does not by itself turn on again, all LEDs are dark. One has to manually press the UPS's power button, which makes server and monitor run again immediately. What could be wrong that prevents UPS from turning itself on again? Below output of upsc: battery.charge: 95 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2009/10/11 battery.mfr.date: 2009/10/11 battery.runtime: 1237 battery.runtime.low: 180 battery.temperature: 29.2 battery.type: PbAc battery.voltage: 13.6 battery.voltage.nominal: 12.0 driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.1 driver.version.data: APC HID 0.93 driver.version.internal: 0.34 input.voltage: 122.0 input.voltage.nominal: 120 output.voltage: 115.0 output.voltage.nominal: 120.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.firmware: 805.q8.D ups.firmware.aux: q8 ups.load: 49.0 ups.mfr: American Power Conversion ups.mfr.date: 2009/10/11 ups.model: Back-UPS CS 350 ups.productid: 0002 ups.serial: 4B0941P71480 ups.status: OL CHRG ups.test.result: No test initiated ups.timer.reboot: 0 ups.timer.shutdown: -1 ups.vendorid: 051d Thanks a lot for any hint!
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
