On Aug 9, 2010, at 11:48 AM, Noel David Torres Taño wrote:
On Lunes 09 Agosto 2010 12:16:39 Charles Lepple escribió:
On Aug 8, 2010, at 10:11 PM, Noel David Torres Taño wrote:
# /lib/nut/blazer_usb -a yukai -u root
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
Supported UPS detected with megatec protocol
Vendor information unavailable
Battery runtime will not be calculated (runtimecal not set)
Same with re-created device with correct permissions.
Many thanks
You're welcome! Check the man page if you would like to try and set
the runtime calibration constants.
Why does driver end? Must I set something in the ups.conf file?
I think (maybe I'm wrong) that the driver program does not end so
you can
contact it through upsc, but it ends quite fast
Are you sure it has terminated? If no major problems are encountered
during startup, the driver goes into the background.
Try it with "-D" to keep it in the foreground for testing. The options
common to all drivers are documented in nutupsdrv(8).
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
