Citeren Jon Bendtsen <[email protected]>:
Please run the following command
/path/to/usbhid-ups -DDD -a upsname > Smart-UPS1500RM.log 2>&1
Are you interested in the same output from APC Smart-UPS RM 3000VA ?
dkserver:/etc/nut# udevadm info --name=/dev/bus/usb/001/004
--attribute-walk | grep -i product
ATTRS{product}=="Smart-UPS 3000 RM FW:666.6.I USB FW:7.4"
dkserver:/etc/nut# udevadm info --name=/dev/bus/usb/001/003
--attribute-walk | grep -i product
ATTR{product}=="Smart-UPS 1500 FW:653.12.I USB FW:4.2"
And maybe also from my 1500 which is not RM?
Yes and yes. For regression testing I keep an archive of report
descriptors. This allows me to parse them again at any time. It is
also helpful to see which of the listed reports is actually used, so
we always ask for about half a minute worth of output (which should
give us a rough idea about the use of the interrupt pipe). Thanks in
advance.
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
