Citeren Arnaud Quette <aquette....@gmail.com>:
indeed, and a full rewrite is also needed, to support the subdrivers
approach as in usbhid-ups.
Yes. Although it would be possible to add the lookup (forward and
reverse) functions like in usbhid-ups (which would allow for better
conversion between IOD <-> NUT values), it would be much better to
start from scratch here.
Since I don't have a SNMP capable UPS, I can't really work on it other than
the occasional fix for an obvious problem.
well, your NMC (in the evolution) is SNMP capable (beside the XML/HTTP
channel).
Yes and no. It indeed does talk SNMP, but as far as I can see doesn't
support changing variables. The only method for changing the
'battery.runtime.low' parameter, is through the HTTP interface. I've
not been able to change a single variable through the SNMP interface.
depending on your exact card reference and FW version, it will expose a
minimum or full set of IETF + MGE MIBS.
Currently it reports
Network Management Card V6.00 HB (SNMP)
Network Management Card/Mosaic 4M 16M/HB (XML)
This is the latest firmware I could find for the NMC 66102 (technical
level 09).
Arjen: if needed, I can also check to send you a more suitable card, but I
know that you're already quite busy.
It would probably be easier to have access to a device with native
SNMP support. I don't need physical access to it, it's enough if I can
reach it through the net.
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
