Hello list, just a quick email to report that the following UPS was supported (mostly) out of the box:
Model: PowerWalker VI 850 LCD Driver: blazer_usb upsc Output (please note I have manually populated the high and low voltages): battery.charge: 100 battery.voltage: 13.50 battery.voltage.high: 13.5 battery.voltage.low: 10 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.0 driver.version.internal: 0.03 input.current.nominal: 3.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 228.2 input.voltage.fault: 228.2 input.voltage.nominal: 220 output.voltage: 228.2 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 63 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665 upsrw Output (I can confirm that the username and password were correct): $ upsrw -s beeper.status=disabled myups Username (backend): xxxxxxx Password: Unexpected response from upsd: ERR ACCESS-DENIED upscmd Output (as above username and password were correct): upscmd myups beeper.toggle Username (backend): xxxxxxx Password: Unexpected response from upsd: ERR ACCESS-DENIED Shutdown testing sequence: Sorry, I don't have any logs (and am reluctant to shutdown now) but I can confirm it worked as designed. Internet Link (its the one in the middle) http://www.powerwalker.com/line-interactive.asp?VA_level=850 Please note, I am not subscribed to the list so if you have any questions please reply direct. Cheers Wayne
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser