Citeren Martin Ivanov <tra...@abv.bg>:
root@alhana:/etc/nut# /etc/rc.d/rc.ups start
Network UPS Tools - UPS driver controller 2.6.0
Network UPS Tools - Generic contact-closure UPS driver 1.36 (2.6.0)
UPS type: Repoteck RPT-800A, RPT-162A
tcgetattr: Inappropriate ioctl for device
Driver failed to start (exit status=1)
Does this mean that the driver is not supported or am I missing something?
The genericups driver is for serial devices only. Only if the UPS has
a supported USB to serial converter on board that is recognized by the
kernel, you can use it. But in that case, you'd need to configure the
/dev/ttyUSBx port that is created, not the USB port.
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
