Hello everybody, I have an Infosec's UPS and would like to shutdown my computer when he's on battery. My Infosec's UPS is not in the list of supported UPS but the driver is the same than megatec's driver (This is the same factory with some differences...) So, here are my configurations : -- Ubuntu Desktop -- apt-get install nut OK
UPS connected to ubuntu via USB cable After connecting my UPS, a new line appears in "lsusb" : Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to serial cd /dev/bus/usb everything in root:nut 660 cd /dev/usb everything in root:nut 660 vi /etc/nut/nut.conf MODE=standalone vi /etc/nut/ups.conf [infosec] driver = usbhid-ups port = auto desc = "Infosec UPS" vi /etc/nut/upsd.users [admin] password = root action = SET instcmds = ALL [localhost] password = localhost allowfrom = localhost upsmon master vi /etc/nut/upsmon.conf MONITOR infosec@localhost 1 localhost localhost master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYFLAG ONLINE SYSLOG NOTIFYFLAG ONBATT SYSLOG NOTIFYFLAG LOWBATT SYSLOG NOTIFYFLAG FSD SYSLOG+WALL NOTIFYFLAG COMMOK SYSLOG NOTIFYFLAG COMMBAD SYSLOG NOTIFYFLAG SHUTDOWN SYSLOG+WALL NOTIFYFLAG REPLBATT SYSLOG+WALL NOTIFYFLAG NOCOMM SYSLOG NOTIFYFLAG NOPARENT SYSLOG RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 /etc/init.d/nut start [ OK ] upsdrvctl start Network UPS Tools - UPS driver controller 2.6.1 Network UPS Tools - Generic HID driver 0.35 (2.6.1) USB communication driver 0.31 No matching HID UPS found Driver failed to start (exit status=1) Do you have any idea? Is my material not supported or is it a configuration's problem ? Thanks you, Regards, Jeremy _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser