Hi again, I've tried two different langid_fix settings with krauler subdriver and this is what has happened:
-------------------------------------------------------------------- [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = krauler langid_fix = 0x4095 sweethome:/etc/nut# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000 debug level is '3' 0.000655 language ID workaround enabled (using '0x4095') 0.169315 Checking device (1D6B/0001) (005/001) 0.169369 - VendorID: 1d6b 0.169376 - ProductID: 0001 0.169381 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd 0.169386 - Product: UHCI Host Controller 0.169391 - Serial Number: 0000:00:10.3 0.169396 - Bus: 005 0.169401 Trying to match device 0.169416 Device does not match - skipping 0.169425 Checking device (1D6B/0001) (004/001) 0.169447 - VendorID: 1d6b 0.169453 - ProductID: 0001 0.169458 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd 0.169463 - Product: UHCI Host Controller 0.169468 - Serial Number: 0000:00:10.2 0.169473 - Bus: 004 0.169478 Trying to match device 0.169484 Device does not match - skipping 0.169491 Checking device (1D6B/0001) (003/001) 0.169512 - VendorID: 1d6b 0.169517 - ProductID: 0001 0.169522 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd 0.169528 - Product: UHCI Host Controller 0.169532 - Serial Number: 0000:00:10.1 0.169538 - Bus: 003 0.169542 Trying to match device 0.169548 Device does not match - skipping 0.169555 Checking device (0001/0000) (002/005) 0.206690 - VendorID: 0001 0.206702 - ProductID: 0000 0.206707 - Manufacturer: ATCL FOR UPS 0.206712 - Product: ATCL FOR UPS 0.206717 - Serial Number: ATCL FOR UPS 0.206722 - Bus: 002 0.206726 Trying to match device 0.206765 Device matches 0.219692 First supported language ID: 0x409 (please report to the NUT maintainer!) 0.219716 Trying megatec protocol... 0.219722 send: Q1 0.222708 read: error sending control message: Broken pipe 0.225691 Stall condition cleared 0.225700 blazer_status: short reply 0.225705 Status read 1 failed 0.225710 send: Q1 0.228696 read: error sending control message: Broken pipe 0.231691 Stall condition cleared 0.231699 blazer_status: short reply 0.231704 Status read 2 failed 0.231709 send: Q1 0.234695 read: error sending control message: Broken pipe 0.236690 Stall condition cleared 0.236699 blazer_status: short reply 0.236704 Status read 3 failed 0.236709 Trying mustek protocol... 0.236714 send: QS 0.236719 read: QS 0.236729 blazer_status: short reply 0.236734 Status read 1 failed 0.236739 send: QS 0.236743 read: QS 0.236748 blazer_status: short reply 0.236753 Status read 2 failed 0.236758 send: QS 0.236762 read: QS 0.236767 blazer_status: short reply 0.236772 Status read 3 failed 0.236777 Trying megatec/old protocol... 0.236782 send: D 0.236787 read: D 0.236791 blazer_status: short reply 0.236796 Status read 1 failed 0.236801 send: D 0.236806 read: D 0.236810 blazer_status: short reply 0.236816 Status read 2 failed 0.236820 send: D 0.236825 read: D 0.236830 blazer_status: short reply 0.236835 Status read 3 failed 0.236839 Trying zinto protocol... 0.236844 send: Q1 0.239696 read: error sending control message: Broken pipe 0.242691 Stall condition cleared 0.242699 blazer_status: short reply 0.242704 Status read 1 failed 0.242709 send: Q1 0.244695 read: error sending control message: Broken pipe 0.247691 Stall condition cleared 0.247699 blazer_status: short reply 0.247704 Status read 2 failed 0.247709 send: Q1 0.250695 read: error sending control message: Broken pipe 0.252693 Stall condition cleared 0.252702 blazer_status: short reply 0.252707 Status read 3 failed 0.252712 No supported UPS detected -------------------------------------------------------------------- [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = krauler langid_fix = 0x409 sweethome:/etc/nut# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000 debug level is '3' 0.000703 language ID workaround enabled (using '0x409') 0.170975 Checking device (1D6B/0001) (005/001) 0.171053 - VendorID: 1d6b 0.171059 - ProductID: 0001 0.171064 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd 0.171069 - Product: UHCI Host Controller 0.171074 - Serial Number: 0000:00:10.3 0.171079 - Bus: 005 0.171084 Trying to match device 0.171104 Device does not match - skipping 0.171114 Checking device (1D6B/0001) (004/001) 0.171137 - VendorID: 1d6b 0.171143 - ProductID: 0001 0.171148 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd 0.171153 - Product: UHCI Host Controller 0.171157 - Serial Number: 0000:00:10.2 0.171162 - Bus: 004 0.171166 Trying to match device 0.171172 Device does not match - skipping 0.171180 Checking device (1D6B/0001) (003/001) 0.171202 - VendorID: 1d6b 0.171208 - ProductID: 0001 0.171212 - Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd 0.171217 - Product: UHCI Host Controller 0.171222 - Serial Number: 0000:00:10.1 0.171227 - Bus: 003 0.171231 Trying to match device 0.171237 Device does not match - skipping 0.171244 Checking device (0001/0000) (002/005) 0.208704 - VendorID: 0001 0.208713 - ProductID: 0000 0.208718 - Manufacturer: ATCL FOR UPS 0.208723 - Product: ATCL FOR UPS 0.208727 - Serial Number: ATCL FOR UPS 0.208732 - Bus: 002 0.208736 Trying to match device 0.208777 Device matches 0.221704 First supported language ID: 0x409 (please report to the NUT maintainer!) 0.221726 Trying megatec protocol... 0.221732 send: Q1 0.224722 read: error sending control message: Broken pipe 0.227705 Stall condition cleared 0.227713 blazer_status: short reply 0.227719 Status read 1 failed 0.227724 send: Q1 0.230709 read: error sending control message: Broken pipe 0.233704 Stall condition cleared 0.233712 blazer_status: short reply 0.233717 Status read 2 failed 0.233722 send: Q1 0.236708 read: error sending control message: Broken pipe 0.238704 Stall condition cleared 0.238712 blazer_status: short reply 0.238716 Status read 3 failed 0.238721 Trying mustek protocol... 0.238726 send: QS 0.238731 read: QS 0.238741 blazer_status: short reply 0.238745 Status read 1 failed 0.238750 send: QS 0.238755 read: QS 0.238759 blazer_status: short reply 0.238763 Status read 2 failed 0.238768 send: QS 0.238773 read: QS 0.238777 blazer_status: short reply 0.238782 Status read 3 failed 0.238787 Trying megatec/old protocol... 0.238791 send: D 0.238796 read: D 0.238800 blazer_status: short reply 0.238805 Status read 1 failed 0.238809 send: D 0.238814 read: D 0.238818 blazer_status: short reply 0.238823 Status read 2 failed 0.238827 send: D 0.238832 read: D 0.238836 blazer_status: short reply 0.238841 Status read 3 failed 0.238845 Trying zinto protocol... 0.238850 send: Q1 0.241709 read: error sending control message: Broken pipe 0.244704 Stall condition cleared 0.244712 blazer_status: short reply 0.244717 Status read 1 failed 0.244722 send: Q1 0.246708 read: error sending control message: Broken pipe 0.249704 Stall condition cleared 0.249712 blazer_status: short reply 0.249717 Status read 2 failed 0.249722 send: Q1 0.252710 read: error sending control message: Broken pipe 0.255704 Stall condition cleared 0.255814 blazer_status: short reply 0.255918 Status read 3 failed 0.255996 No supported UPS detected -------------------------------------------------------------------- Is there any other option I could try? best regards Alex On 14/08/2012, at 22:54, Arnaud Quette wrote: 2012/8/13 Rojo Alvarez, Álex <alex.r...@ikusi.com<mailto:alex.r...@ikusi.com>> Hi, this is the output of the command you asked for. THANKS!!!! sweethome:~# lsusb -v -d0001:0000 (...) try again with subdriver=krauler and langid_fix in ups.conf: http://www.networkupstools.org/docs/man/blazer.html cheers, Arno
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser