Hello! I tried NUT 2.6.5-1 (Windows port) with my APC Back UPS ES. It seems I have configured NUT properly, nut-scanner found my UPS:
[nutdev1] driver = "usbhid-ups" port = "auto" vendorid = "051D" productid = "0002" product = "Back-UPS ES 525 FW:851.t3.I USB FW:t3" serial = "8B0745R23575 " vendor = "American Power Conversion" bus = "bus-0" I see some errors: 1. UPSMON/UPSC tools are returning "data stale": Network UPS Tools upsmon 2.6.5-3691:3709M 0.000000 UPS: upsa@192.168.10.200 (master) (power value 1) 0.012000 Using power down flag file /etc/killpower 0.022001 debug level is '5' 0.026001 Trying to connect to UPS [upsa@192.168.10.200] 0.039002 Login on UPS [upsa@192.168.10.200] failed - got [ERR ACCESS-DENIED] 0.044002 Current power value: 1 0.047002 Minimum power value: 1 5.049289 pollups: upsa@192.168.10.200 5.055289 get_var: upsa@192.168.10.200 / status 5.064289 Poll UPS [upsa@192.168.10.200] failed - Data stale 5.075290 do_notify: ntype 0x0005 (COMMBAD) 5.083290 Communications with UPS upsa@192.168.10.200 lost ... What should I check to fix ACCESS-DENIED error? 2. UPSHID-UPS fails with output: Network UPS Tools - Generic HID driver 0.37 (2.6.5-3691:3709M) USB communication driver 0.31 0.000000 debug level is '3' 0.000000 upsdrv_initups... 0.031200 Checking device (051D/0002) (bus-0/\\.\libusb0-0001--0x051d-0x0002) 0.109200 - VendorID: 051d 0.109200 - ProductID: 0002 0.109200 - Manufacturer: American Power Conversion 0.124800 - Product: Back-UPS ES 525 FW:851.t3.I USB FW:t3 0.124800 - Serial Number: 8B0745R23575 0.140400 - Bus: bus-0 0.140400 Trying to match device 0.140400 Device matches 0.187200 HID descriptor, method 1: (9 bytes) => 09 21 10 01 21 01 22 78 04 0.202800 HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 78 04 0.218400 HID descriptor length 1144 ... 3.556806 Report[get]: (3 bytes) => 60 00 00 3.556806 Path: UPS.ff860001.ff860023, Type: Feature, ReportID: 0x60, Offset: 0, Size: 16, Value: 0 3.588006 Report[get]: (2 bytes) => 61 89 3.588006 Path: UPS.ff860001.ff860026, Type: Feature, ReportID: 0x61, Offset: 0, Size: 8, Value: 137 3.603606 Report[get]: (5 bytes) => 62 00 01 02 03 3.619206 Path: UPS.ff860001.ff860025, Type: Feature, ReportID: 0x62, Offset: 0, Size: 32, Value: 5.0463e+007 3.634806 Report[get]: (2 bytes) => 51 84 3.634806 Path: UPS.PowerConverter.ff860024, Type: Feature, ReportID: 0x51, Offset: 0, Size: 8, Value: 132 3.650406 Report descriptor retrieved (Reportlen = 1144) 3.666007 Found HID device 3.666007 Detected a UPS: American Power Conversion/Back-UPS ES 525 FW:851.t3.I USB FW:t3 3.681607 libusb_get_report: libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning. 3.712807 Can't retrieve Report 0c: Input/output error [A device attached to the system is not functioning. ] 3.728407 Can't initialize data from HID UPS I installed different versions of libusb driver, but no success. The most interesting thing is that one of previous version (2.6.0-1 or 2.6.1-1) returned real data from UPS. Any ideas? Thanks, Denis _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser