Michal, Kastus, Jack, I have a similar request sitting in the Features requests for years: https://alioth.debian.org/tracker/index.php?func=detail&aid=304645&group_id=30602&atid=411545 http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-June/000938.html
would you please unite your efforts and bring a patch for NUT FAQ (or the driver(s))? thanks a lot! Arnaud -- NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.fr 2012/11/11 Kastus Shchuka <ks-...@tprfct.net> > On Sun, Nov 11, 2012 at 07:21:35AM -0800, JS wrote: > > I followed this procedure (charging the battery fully, letting it drain > off a token load while UPS is grounded on a surge protector) but it did not > help. > > > > Perhaps I missed something running this procedure; if anyone has > suggestions for solving this they'd be greatly appreciated. > > I've been in the same situation after replacing the battery in SC620I > model. > > Then I found > http://old.nabble.com/SmartUPS-and-new-battery-td20678966.html > and followed the procedure: > > 1. Shutdown the apcupsd daemon. > 2. Run apctest > 3. Choose option 6 to enter terminal mode > 4. Enter Y (UPS should respond SM) > 5. Enter 1 (one, not el; wait 4 seconds) > 6. Enter 1 (one, not el; UPS should respond PROG) > 7. Enter 0 (zero, not oh; UPS should respond with current constant) > 8. Enter + (plus) or - (minus) to increment/decrement the value > 9. Enter R to reprogram constant value (UPS should respond Bye) > 10. Enter Y (UPS should respond SM) > 11. Enter 0 (zero, not oh; UPS should respond with the new constant) > 12. Enter Esc to exit terminal mode > 13. Choose option 7 to exit apctest. > > The value to store in the register 0 differs by the model. There is a table > posted in the middle of the thread. I hope your model is listed there. > If you cannot find your model, you may want to try experimenting with > different > values. > > In my case, after updating register 0, my UPS is back to 42 min runtime. > > Hope this helps. > > Kastus > >
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser