On Feb 14, 2013, at 4:23 PM, Kris Jordan wrote: > port = com3 > > It's obvious but I initially didn't know either. > > Dev suggestion: Might be good if this was noted in the sample config.
Does it matter whether or not the COM port name has a colon after it? > Nick P. Petropoulos wrote, On 2/14/2013 12:43 PM: >> Dear friends, >> >> I am trying NUT standalone on XP. >> >> My UPS is on serial port COM3 >> >> How can I include the serial port info in the ups.conf file. >> >> If it was like in Linux, I would put port=/dev/ttyS2 >> >> However, "something" tells me that this is not correct. >> >> Your input will be much appreciated. >> >> Regards >> >> Nick >> > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser