Hi All,
I have a powerware UPS 5110 connected to an openindiana server with the
bcmxcp_usb driver and running nut 2.65 compiled and installed as root to
avoid permission issues.
On running the following debug code to test the UPS's communication it
fails at the same time with the following error.
./bcmxcp_usb -u root -DDD -a 5110
.......
2.523879 get_answer: (128 bytes) => ab 01 79 01 02 50 00 50 01
00 1e 00 01 00 10 50
2.523926 4f 57 45 52 57 41 52 45 20 55 50 53 20 20 20 5c 00 00
00 00 00 00 00 00 00
2.523956 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
51 51 00 00 00 00 51
2.523986 00 00 00 00 00 00 00 f0 00 f0 00 00 00 f0 00 00 00 00
00 00 00 00 f0 00 00
2.524015 00 00 00 00 00 00 51 00 00 51 00 00 00 00 00 00 00 00
00 f0 00 00 00 00 00
2.524039 00 00 00 00 00 00 00 f0 18 2b ab 01
2.524060 get_answer: block_number = 1
2.524080 get_answer: data length = 121
2.524102 get_answer: sequence number (1) is ok
2.524122 get_answer: checksum is ok
2.524144 get_answer: block_number = 1
2.524165 get_answer: data length = 0
2.524187 Communications with UPS lost: get_answer: not the right
sequence received 19!!!
2.524208 Communications with UPS lost: Error executing command
2.524229 Could not communicate with the ups
2.524260 CLOSING
Does anyone know if there is a fix for the 2.524187 Communications with
UPS lost: get_answer: not the right sequence received 19!!! error?
My ups is nothing exciting and just lists the following
[5110]
driver = bcmxcp_usb
port = auto
Thankyou
Paul
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
