Hello, just joined to the list, because i have a problem. :S We have 2 exact same configuration: basic Fujitsu server + Eaton NV1000H ups. OS is Debian Squeeze. According to the driver list, the ups uses the blazer_usb driver. I never tried nut before, so i read some of the docs, and configured it manually. The problem pops up when i try to simulate the power-outage. I just unplug the ups' power, and... the usb devices reconnects, in this case it means the keyboard and the ups itself. I don't know ... should this happen? I thought that the ups should provide enough power to not interrupt anything....
So, the udev changes/increments the ups' device number, and the blazer can't reconnect to it. Most of the time. Sometimes it works, but mostly the connection lost, and upsmon wont work anymore. I ran blazer in debug mode, like blazer_usb -DD -a eaton. The strange thing is, when i unplug the power, the new device appears in the blazer's output, but sometimes cannot match it. However i tried it with productid, vendorid, serial, bus, novendor etc, no match found, but it's there. I tried to change the pollinterval, no luck. Tried it with the default blazer in squeeze, from sid and the experimental, same thing. I cannot provide logs atm, but any advice should help. thx
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser