On May 1, 2013, at 5:45 PM, Bill Carlson wrote: > Finally got around to hooking up my Powercom BNT-1500AP to nut. It's the old > serial interface. > > Connects okay and gets most information, but a couple of data are way off. > > Any config recommendations or upgrade recommended? I've played with config a > little, but no hits yet.
It looks like the BNT-other defaults were updated after 2.4.3, specifically to address the BNT-1500AP. I think you can just add the following "BNT-other" values to ups.conf: http://www.networkupstools.org/docs/man/powercom.html#_bnt_other You might also need an explicit "type = BNT-other" (which I think is no longer needed in the latest version). If not, we can try recompiling the powercom driver. References: https://github.com/networkupstools/nut/commits/master/drivers/powercom.c https://github.com/networkupstools/nut/commit/ecaee22189ca4add854c7fc0d5aca1e4ee4bfe2d#drivers/powercom.c -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser