Charles, the unit has two redundant power supplies, with only one hooked up to the UPS. So I should be able to do a deep test with the machine itself, right? I have tried it, but it aborts at some point...
For the quick test, it discharges the battery a bit, then recharges, but once it is back to 100%, upsc still gives me: ups.test.result: No test initiated Is that expected? Best, Christian Am 17.12.2013 03:55, schrieb Charles Lepple: > On Dec 8, 2013, at 10:41 PM, Christian wrote: > >> test.battery.start.deep - Start a deep battery test >> test.battery.start.quick - Start a quick battery test > > Ideally, you would want to do a deep test with a dummy load, like a > lamp, so as not to put your server in danger of getting cut off > again. You can probably do the test.battery.start.quick test with > the server still plugged into the UPS, though. > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser