On Feb 14, 2014, at 9:26 AM, Charles Lepple wrote: > On Feb 13, 2014, at 10:49 PM, Иши Кылса wrote: > >> Slightly changed the list, took from running snmptranslate for all >> parameters: >> snmptranslate -IR -On upsBaseIdentModel upsBaseBatteryStatus >> upsSmartBatteryCapacity upsSmartBatteryTemperature upsSmartInputLineVoltage >> upsBaseOutputStatus upsSmartOutputVoltage upsSmartOutputFrequency >> upsSmartOutputLoad upsSmartControlUpsOff upsSmartControlSimulatePowerFail >> upsSmartControlFlashAndBeep > > All but the last three are mapped here: > https://github.com/networkupstools/nut/tree/snmp_subdriver @ ab7b0452e (might > need to re-clone this; I rebased this on master.)
I forgot to mention, if you don't want to deal with autoconf, etc., when building from Git, you can grab a snapshot from Buildbot: nut-2.7.1.5.tar.gz This builder generates the snapshots: http://buildbot.networkupstools.org/public/nut/waterfall?show=Debian-x64-gcc > > I haven't read up on the difference between NUT variables and commands in > snmp-ups. > > Please try building snmp-ups, and let me know how the output of upsc looks. > >> .1.3.6.1.4.1.935.1.1.1.6.2.1 >> .1.3.6.1.4.1.935.1.1.1.6.2.4 >> .1.3.6.1.4.1.935.1.1.1.6.2.5 (Last 3 OIDs didn't return values with >> snmpget, all others returned correct values as listed above.) > > The upsSmartControl* OIDs are probably write-only (although the MIB indicates > you should be able to read them back). > > -- > Charles Lepple > clepple@gmail > > >
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser