Since there is apparently no immediate solution to upsstats.cgi not reading the output voltage correctly, I have moved on to trying to use upsset.cgi. To recap the UPS is a CyberPower CyberPower CP1500PFCLCD UPS running on a headless server running Slackware 14.1 with the 3.10.7 kernel. The version of NUT is 2.71 and I am using usbhid-ups for communication with the UPS
The problem is that when I run upsset.cgi I first get a prompt for user name and password. I then enter the same username and password as I established in upsd.users and it seems to accept it. When I try to change a setting on the settings page however I receive an access denied message. An example is below. set input.transfer.high to 142 (was 136) Unexpected response: ERR ACCESS-DENIED No settings changed. I also receive a similar message when I try to use the quick command screen. Sending command: test.battery.start.quick Response: ERR ACCESS-DENIED Anyone have a suggestion on what is wrong. _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser