Hi, I have a FreeBSD 9.2 system with NUT 2.6.5 (installed via the ports tree) with an MGE Pulsar 1500 connected. A while ago it complained it needed the battery replaced and it was finally replaced last week, however I can't find out how to reset the flag in NUT.
I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. The UPS is connected via RS232 and upsc output is as follows.. battery.capacity: 9.00 battery.charge: 100 battery.charge.low: 50 battery.charge.restart: 0 battery.energysave: no battery.protection: yes battery.runtime: 3000 battery.type: PbAc device.mfr: MGE UPS SYSTEMS device.model: Pulsar 1500 device.serial: 1Y3G41223 device.type: ups driver.name: mge-shut driver.parameter.offdelay: 120 driver.parameter.ondelay: 190 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/cuau1 driver.version: 2.6.5-Unversioned directory driver.version.data: MGE HID 1.31 driver.version.internal: 0.37 input.bypass.current: 0.00 input.bypass.voltage: 224.0 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 224.0 input.voltage.nominal: 230 outlet.1.autoswitch.charge.low: 0 outlet.1.delay.shutdown: 65535 outlet.1.delay.start: 3 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 1 outlet.1.status: on outlet.1.switchable: yes outlet.2.autoswitch.charge.low: 0 outlet.2.delay.shutdown: 0 outlet.2.delay.start: 2146379092 outlet.2.desc: PowerShare Outlet 2 outlet.2.id: 2 outlet.2.status: off outlet.2.switchable: yes outlet.desc: Main Outlet outlet.id: 0 outlet.switchable: yes output.current: 0.60 output.frequency: 50.0 output.frequency.nominal: 50 output.powerfactor: 0.88 output.voltage: 230.0 output.voltage.nominal: 230 ups.alarm: Replace battery! ups.beeper.status: enabled ups.delay.shutdown: 120 ups.delay.start: 190 ups.firmware: 00 ups.load: 9 ups.load.high: 102 ups.mfr: MGE UPS SYSTEMS ups.model: Pulsar 1500 ups.power: 142 ups.power.nominal: 1500 ups.productid: ffff ups.realpower: 126 ups.realpower.nominal: 1350 ups.serial: 1Y3G41223 ups.start.auto: yes ups.start.battery: yes ups.start.reboot: yes ups.status: ALARM OL CHRG RB ups.test.interval: 604800 ups.test.result: Done and passed ups.timer.shutdown: 0 ups.timer.start: 0 ups.type: online ups.vendorid: 0463 Any hints? Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser