OS version: FreeBSD 8.4-RELEASE-p19 NUT version: nut-2.7.2_6 NUT installation method: from freebsd pkg system Device info: EATON 9SX 5000i, manufacturing date: 05.09.2014 ups.firmware: 9SX5Ki
When i try to see battery charge, in output it have not such variable, and i can't control my server and other clients connected to them. Any options cannot power of server. How to see current battery state or battery runtime by nut? Thanks.
# usbconfig | grep EATON ugen1.3: <Eaton 9SX EATON> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON # cat /usr/local/etc/nut/ups.conf [eaton9sx] driver = usbhid-ups port = "auto" desc = "EATON 9-SX 5000i" # ls -la /usr/local/etc/nut/ | grep ".conf" | grep -v sample -rw-r----- 1 uucp uucp 1543 Dec 15 17:03 nut.conf -rw-r----- 1 uucp uucp 3890 Dec 17 12:39 ups.conf -rw-r----- 1 uucp uucp 4604 Dec 15 17:19 upsd.conf -rw-r----- 1 uucp uucp 15273 Dec 15 17:14 upsmon.conf # cat /etc/devfs.conf perm ugen1.3 0660 own ugen1.3 root:uucp # cat /etc/devfs.rules [nutusb=10] add path 'usb/1.3.0' group uucp mode 0660 upsc eaton9sx battery.capacity: 5.00 battery.energysave: no battery.protection: battery.type: PbAc device.mfr: EATON device.model: Eaton 9SX 5000i device.serial: G200E36025 device.type: ups driver.flag.maxreport: enabled driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.7.2 driver.version.data: MGE HID 1.33 driver.version.internal: 0.38 input.bypass.current: 1.20 input.bypass.frequency: 50.0 input.bypass.frequency.nominal: 50 input.bypass.voltage: 223.5 input.frequency: 50.0 input.frequency.nominal: 50 input.voltage: 223.2 input.voltage.nominal: 223 outlet.1.autoswitch.charge.low: 0 outlet.1.delay.shutdown: 10 outlet.1.delay.start: 3 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 1 outlet.1.status: on outlet.1.switchable: yes outlet.2.autoswitch.charge.low: 0 outlet.2.delay.shutdown: 20 outlet.2.delay.start: 6 outlet.2.desc: PowerShare Outlet 2 outlet.2.id: 2 outlet.2.status: on outlet.2.switchable: no outlet.desc: Main Outlet outlet.id: 0 outlet.switchable: no output.current: 1.10 output.frequency: 0.0 output.frequency.nominal: 50 output.powerfactor: 0.00 output.voltage: 0.0 output.voltage.nominal: 230 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.efficiency: 0 ups.firmware: 9SX5Ki ups.load: 5 ups.mfr: EATON ups.model: Eaton 9SX 5000i ups.power: 264 ups.power.nominal: 5000 ups.productid: ffff ups.realpower: 226 ups.realpower.nominal: 4500 ups.serial: G200E36025 ups.start.auto: yes ups.start.battery: yes ups.start.reboot: yes ups.status: OL CHRG BYPASS ups.test.interval: 2592000 ups.test.result: No test initiated ups.timer.shutdown: 0 ups.timer.start: 0 ups.type: online ups.vendorid: 0463 # /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.000636 upsdrv_initups... 0.000852 Checking device (0463/FFFF) (/dev/usb//dev/ugen1.3) 0.256952 - VendorID: 0463 0.256983 - ProductID: ffff 0.256990 - Manufacturer: EATON 0.256996 - Product: Eaton 9SX 0.257002 - Serial Number: G200E36025 0.257007 - Bus: /dev/usb 0.257014 Trying to match device 0.257025 Device matches 6.138965 HID descriptor length 3369 9.069961 Report Descriptor size = 3369 9.071173 Using subdriver: MGE HID 1.33 there're lot of data in output, if it needed i can attach in file... -- Best regards, Yaroslav. _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser