On 01/20/2015 11:39 AM, Maurizio wrote:
Hi there,
I have a question about a raspberry pi as NUT server and a "relay".
I explain my situation: I have an UPS with USB port, so I connect it to
the rasp. The problem is that I have a device manageable only via USB
port.
How can I handle this configuration?
My assumptions are:
1) split the USB cable from UPS to rasp and device, but I don't know if it
works
2) connect the UPS to rasp directly, so connect the rasp (by GPIO) to
device as a Serial port with a DIY cable.
The problem with second solution is that I don't know if (and how) I can
do it with NUT.
Thanks a lot for all opinions.
buy & use an USB hub.
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
